How do you taek off the fender

Download the HDD Unlock Wizard diagnostic tool free from the link on the HDD Unlock page. The program allows you to test the program to see if it can recognize your hard disk before you attempt to unlock your drive. Double-click the icon in the "Downloads" folder and click "Run" to launch the program setup, then follow the HDD Unlock Wizard Setup Wizard to install.

Open the Unlock Wizard and click "Next" to get to the drive selection screen. The program automatically displays any drive that it can recognize in the "Drive selection" window and its status.

Select the name of the hard drive from the "Drive selection" window. Click "Next" to move into the status screen of the Wizard, then "Next" again to move to the unlock screen.

Go to the HDD Unlock page and purchase a virtual unlock card code for the program. The code will be emailed the email address you provide on the website. You must have an unlock code in order to complete the unlocking process with the HDD Unlock Wizard.

Enter your code into the provided box in the HDD Unlock Wizard. Once the code is entered, the Wizard will unlock the hard disk by erasing the data and re-certifying the drive, restoring it to its original factory settings.

Shut down the computer and boot it back up after the Unlock Wizard is finished the unlocking process. The computer hard disk should be unlocked and restored to factory settings.

1. Repair Station

Download the Repair Station diagnostic tool from HDD Tools and install it on your computer. Unlike HDD Unlock Wizard, Repair Station attempts to unlock the hard disk without erasing the information on the drive.

Register with your name and email address and create a login and password on the HDD Tools page. You must have a login and password to use the Repair Station tool.

Open Repair Station on your computer and go through the program screens to run the diagnostic test on your hard drive. If the hard disk appears in the list of available drives, Repair Station can unlock it.

Buy a Repair Station license code. The code will be emailed to the email address you provide. Enter the code into the provided box in the Repair Station application. Repair Station will attempt to unlock only the firmware area of the hard disk, without affecting the other information stored on the disk.

Restart the computer when Repair station is finished working. The hard disk should be unlocked without any effect on the rest of the system

Instructions

Remove the lugnuts from the front tires using a tire iron. Raise the front end of your car using a jack and rest the front end on jack stands. Remove the tire from the frame of your car. Open the hood of your car.

Remove the securing screws on the wheel well using a screwdriver. Pull the wheel well off of the frame.

Locate the bolts that are securing the wheel well to the frame and remove the bolts using a ratchet set. Locate the bolts securing the fender to the frame inside the engine compartment and remove the bolts using a ratchet set.

Pull the fenders off of the frame of your car.