Just bought car and didn't recieve a owners manual
SOURCE: 2001 chrsyler sebring garage door opener
go on the opner motor press the learn button until it blinks then press the remote button within 20 seconds it should work after that
SOURCE: program my garage door opener
What the last guy post is correct, but you have to tel your car what kinda remote you have. Assuming you have homelink Which 95 percent of the cars do ill give you a very short version on how to do this. First thing you need to do is clear the code in your car from any other owners. Do do this turn your car's key to the on or acc non running position. Press and hold the first and last button. Untill the light reacts different ether starts flashing or flashes faster etc. Then you need to get one of your remotes. Press and hold the button you want to set in your car and press your remote button at the same time untill the light reacts diferent. Mind you hold your garage remote as close to your car remote as you can. Then finally Find your learn button on your garage door opener it's self it can be in the back or the front if its in the front you have to remove the cover press the button once DO NOT HOLD IT. then go to your car and press the button you set for about 2 seconds and repet 1-2 more times untill your garage door moves. Make sure nothing is in the way of the garage door. (I know that should go with out saying.)
SOURCE: What type of special coolant is needed for the
Please use a 50/50 mix of any kind that is formulated coolant I use texaco
SOURCE: Visor Garage Door Opener
GOTO HOMELINK.COM
THEY MAKE THE SYSTEM AND HAVE INSTRUCTIONS YOU CAN DOWNLOAD.
PLEASE NOTE: MOST BUT NOT ALL BRANDS/MODELS OF OPENER WILL WORK WITH THIS SYSTEM.
HOPE THIS HELPS
SOURCE: I'm trying to program my
No,because the garage door opener has a very spacific signal that will open the garage.
1,315 views
Usually answered in minutes!
×