I reciently helped a friend in replacing all of the spark plugs and wires in her landrover. However we did change them one at a time I just couldn`t be the one removing the wires from the coil due to lack of room! So i`m not sure if anything was switched or not! i am unable to find the schematics for the spark plugs so your my last choice!
This is your best choice.Here is a diagram attached.
How change spark plugs land rover discovery
SOURCE: i need a diagram of the firing order for spark
2002 Land Rover Discovery II 4.0 liter V-8
Hope this helps (remember rated this).
SOURCE: i need a diagram for
If you have not removed any wiring yet,why not draw one out for your use ! You can number the wires,or tape them with masking tape then mark them,and to the cylinders, in order of firing or in front to rear on one bank left or right and to the coil towers with a white marker.or a card board template with numbered positions for the wires to hook up to the correct towers. Or just change them one at a time.
SOURCE: spark plug location on ignition
If you have individual cylinder coil pack, remove the coil pack and the spark plug will be under it. There is a spark plug boot on the bottom of the pack that plugs directly onto the spark plug.
3,309 views
Usually answered in minutes!
×