Engine cranks but won't start does not have spark from coil to distributor
SOURCE: 1996 1500 ram wont start
there is also a crank sensor that can keep it from sparking. are you getting voltage to the coil
SOURCE: cranks over but won't start
Have you had it scanned, I had to replace my crank sensor on mine.
SOURCE: 98 dode ram wont crank no spark
May have no spark due to a bad crank sensor, which is responsible for spark when it gets a pulse through the cars' computer.
SOURCE: 1992 dodge 318 engine turns over, but no start. No
if truck has a ceramic ballist resistor near and connected to coil this could be problem or the crk posistion sensor could be too, i would change ballast first if you have on your truck appx cost $10
SOURCE: no spark,new coil still no spark,crank sensor? 95 dodge ram 5.2 l
Could possibly be the ECM or computer it may be the crank sensor. The crank sensor is probably the cheepest so I would start there. Since it sound like you may be throwing parts at this, since you cant drive it to have a diagnostic done and you can't have the crank sensor tested, I would buy a used one from a junk yard to see if that is the problem to save a little money since you may have to buy somthing else if that does not work. Good luck
3,186 views
Usually answered in minutes!
×