The front bumper on my 1999 gmc jimmy is partially unattached on the right side how can I fix it by myself?
SOURCE: 1999 GMC Jimmy. Driver's heated seat does not work
i have came across this on one of these before and it was the element that heats the seat had broken ,and ive had one where it was an electrical problem (switch )
SOURCE: firing order for gmc jimmy 1999
-Drivers side starting at the front of engine: 1-3-5
-Passenger side starting at fornt of engine: 2-4-6
SOURCE: passlock gmc jimmy
try this, turn key on but do not try to start, walk away for 30 mins, turn key off for 1 min, then try to start
SOURCE: How to uninstall a blower motor on a 1999 GMC JIMMY
Yeah if you have to tap on it, then that means the brushes in the motor are worn out and you need to replace it. The blower motor is behind the PCM and Coolant Overflow bottle. If you remove these then it will give you better access to motor. You'll have to cut around housing. There should be a groove already there for you, just make sure you don't cut all the way around it. Once you open it and get the new one installed, you'll have to use caulk to seal where you cut it at.
127 views
Usually answered in minutes!
×