Audi a6
Enter the radio code, take your car to the dealership with proof of ownership and they can get it for you, you should have it from the previous owner or if you bought it new, to enter it, hold the pscan and rbds buttons for a few seconds, then numbers will show up, press the corresponding buttons to change the numbers, when you have your code in, hold pscan and rbds buttons for a few seconds. when you release the radio should unlock, good luck
SOURCE: I BROUGHT A AUDI 2000 A6 4.2 SAFE RADIO
Turn on radio - the word SAFE will appear in the display. Press th P.SCAN and RBDS buttons simultaneously and hold them down until "1000" lights up in the display.Release buttons.Do not, under no circumtances, continue holding them down or press them once again. This will cause the radio to consider the number 1000 to be the input code.Use station buttons 1,2,3,and 4 to enter the code number on your Radio Card. Use the button 1 to enter the first number 2 for the second number 3 for the third number and 4 for the last number.Once you have entered the code and it shows on the display,press the P.SCAN and RBDS buttons down again simultaneously and hold them down until the word SAFE appears in the display.Release buttons. Soon afterwards a frequency will be displayed.
SOURCE: Stereo Says Safe and Can't listen to it
Get the code from your dealer with the car's VIN if the system is OEM.
Chances are the code is somewhere in the owners manual package that came with your car....so much for theft proofing...if you or the PO haven't removed it.
If you have the code, like 0095, you press and hold two buttons on the RHS of the Bose Symphoney II, the PSCAN and RBDS buttons IIRC for about 3-5 seconds...the SAFE should go out and 0000 appear on the screen.
You then use the first four program buttons to cycle each number (1 for first 0, 2 for second 0, etc.) to the program code. When you've entered the program code, press the PSCAN and RBDS buttons again to start the radio. I don't think the ignition has to be on.
Next time use a battery jumper...I prefer the portable kind that can be recharged through the power socket/lighter. I just replaced my battery ($153 genuine Audi OEM vice $300 installed) and had no issues with the radio. BTW, the auto up on the drivers and passenger windows probably has to be reset. Lower the window(s) all the way, raise them up and HOLD the switch up for 3 seconds...the auto up will reset.
SOURCE: 2002 audi a6 transmission is in safe mode. What
hi, what it usually mean is that you have shifted down in to a lower gear whilst the revs where to high so then your gearbox goes into safe mode to protect it from further damage the only way to reset this is to take the car to a main dealers and have a diagnostic check done.
Let me know how you get on or if you need further assistance ok
909 views
Usually answered in minutes!
Took factory radio out and was gonna put in an after market one but didnt like it so I put the factory one back in and it's locked
how to fix a squeaking lock on a 2005 audi a6
×