At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
New gas in mine also will try to hit but just wont crank and run. New gas in mine also will try to hit but just wont crank and run.
AnonymousJan 19, 2009
I have the same problem. Good spark and fuel. Sprayed either in snorcle. It did not try to sputer. I also have a fully charged batery. I have the same problem. Good spark and fuel. Sprayed either in snorcle. It did not try to sputer. I also have a fully charged batery.
Yes I have the same problem with my 1998 1500 vortec 5.0 my email is [email protected] thank you
Yes I have the same problem with my 1998 1500 vortec 5.0 my email is [email protected] thank you
AnonymousJan 25, 2009
i have the same problem my is vortec 5.7 it cranks but wont start have spark and proper fuel level any solutions please.i have the same problem my is vortec 5.7 it cranks but wont start have spark and proper fuel level any solutions please.
i just rebuilt a 5.0l vortex out of a 1998 GMC. and it turns over but will not start i know i got proper fuel pressure just replaced pump i have spark and everythign but it will not run.i just rebuilt a 5.0l vortex out of a 1998 GMC. and it turns over but will not start i know i got proper fuel pressure just replaced pump i have spark and everythign but it will not run.
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Check the fuel pressure. Should be 55 psi. Here are a few possibilities
https://www.justanswer.com/chevy/b6nmz-1998-silverado-55-psi-fuel-pressure-key-on-lots.html#:~:text=1998%20Silverado.%20Has%2055%20psi%20fuel%20pressure%20with,on%2C%20lots%20of%20spark%2C%20cranks%20but%20won%27t%20start.
Does it have spark at the spark plug's ? Does it have fuel pressure ? Is the anti-theft light on ? Have you check ASD relay in the under hood fuse/relay box ? There are videos on youtube diagnosing engine cranks no start condition .
Check spark at the spark plug by putting a screw driver up the cover hold it close to an earth and get some one to crank it over ,the spark should jump to earth.
Sounds like you lost a fuel pump, although they usually don't quit while being driven. Have it towed and get a fuel pressure check. That vehicle has to have very close to 60 psi fuel pressure to run. Have a new fuel filter installed also. Plugged fuel filters are the most common cause of fuel pump failure.
check your ecm-ign fuse.if it is ok check to see if you have power to your spider injector.if you have power, you either have a bad computer or a bad connection between the computer and the inj.do you have spark??.if you have no spark check your ign module or bad connection at the ign module.i have seen that before.
This sounds llike weak feul pressure, the fuelpump may need replacing, the first thing to do is have the fuel pressure tested and if the pressure is low then have the pump replaced. the pump is located inside the fuel tank and the tank will need to be dropped to replace the pump, good luck ,
Usually if no rpm signal, the vehicle won't start. Engine cranking, did you check for spark at the spark plugs? The fuel pressure you listed may have been the initial prime. It sounds like no injector pulse. The rpm signal comes from crank sensor. If your missing rpm signal, may thought is the crank sensor.
Were there any applicable trouble codes?
how many miles on your truck , if you have high miles200,000 + need to check timing chain and gears , compression , are the spark plugs getting wet with fuel ( this will indicated wether or not injectors are firing ) Do you have a scanner available , and are you getting any codes .
New gas in mine also will try to hit but just wont crank and run.
I have the same problem. Good spark and fuel. Sprayed either in snorcle. It did not try to sputer. I also have a fully charged batery.
Yes I have the same problem with my 1998 1500 vortec 5.0 my email is [email protected] thank you
i have the same problem my is vortec 5.7 it cranks but wont start have spark and proper fuel level any solutions please.
i just rebuilt a 5.0l vortex out of a 1998 GMC. and it turns over but will not start i know i got proper fuel pressure just replaced pump i have spark and everythign but it will not run.
×