Moved wiper still won't go up
I figured out that the 6 bolts that hold the trim panel onto the end gate are all accessible from the inside of the truck. Once you have access, by disconnecting the wiper motor connection and plugging in the new motor you can open the door. To replace the wiper motor the window needs to come out. To remove the glass lower the window half way and remove the 2 bolts that hold it to the lift mechanism. Then the motor and mount can be removed.
I know this question is old, but I am responding so others with the same problem can see. I wired the Rear Window Motor Park Signal wire and the Rear Window
Motor Speed Signal wire together and it completely bypassed the rear
wiper motor. Now the window goes up and down. This doesn't fix the rear wiper motor, but you will be able to have access to it now that the window is out of the way
I made and album to show.
http://imgur.com/a/q3vww
Can you tell me how to open the door when the window is stuck fully up because of the wiper problem?
That sounds great. But how do I open the door when the window is stuck in the fully up position because of the wiper problem?
hello, well little info, you don't need to take the rear window out to get the rear window wiper motor out, got that in back on floor now, the problem i got is i still can't get the window down, i unplugged the motor and i run a wire from the white wire to the green and it did nothing ? still can't roll it down , now i'm thinking that i have to plug the motor in and cut the green and the white wires going the the motor ,before plug in, connect them together to see if the window will go down? one thing i don't understand is i got different colors in my xuv going to the motor, they are orange , black(bigger diameter wire) green and white(smaller diameter wire. Is the green and white the same as the green and yellow?tks
×
SOURCE: 2004 GMC Envoy XUV mid-gate window won't roll up
be sure the gate is fully closed or it will not roll up if it is firmly in place and still does not go up you will have to remove the cover and see if the actuator plastic has broken off from the switch, it also could be a bent rod and or the switch is bad. Check fuses as well just to be sure before going to all the other work to pull cover off. Hope this is helpful and thanks for using Fix-ya.
SOURCE: GMC 2006 Envoy. Rear Wiper arm pressure on window
put oil on the pin that fastens the arm to the rotator. work the arm up and down several times to work out the grindge and rust. Reoil and repeat several times
wiper will rest on the window for full operation
SOURCE: rear window in tailgate will not go up in 2004 gmc envoy
try putting washing up liquid in the guide with a cotton bud if you getting power to the window that should help free it up
SOURCE: 2004 GMC Envoy rear hatch complete door wont
door lock actuator solenoid ( inside of door) needs to be replaced
SOURCE: 2004 GMC Envoy rear hatch complete door wont
I have this same problem currently...did you find anything out about it?
1,423 views
Usually answered in minutes!
×