My car broke down and some stranger walked up and began TAKING APART my car! He took off the Duralast/Vapor Canister and I need to know how do I put it back on, step by step? Do i need to do other things as well before trying to start the car to ensure that everything runs correctly?
Wiring, schematic, electrical diagrams, fuse diag, error codes, torque settings etc are basic contents of these online books they have here on this website www.reliable-store.com I have attached. Must check it out
SOURCE: 1994 chevy cavalier fan belt came off how to put back
Depending on how much of the bolt broke , you may be able to get it out wit a pair of vise grips or an extractor bolt. If it broke flush to the engine block you'll have to drill it out and try to exctract the rest. I would highly recomend leaving this part for a mechanic with experience to do because if you don't do it right it will cause more damage than you want to deal with. at this point I would say to have it towed to a shop and let them extract the broken bolt. this is not something you want to try yourself if you haven't done it before. Best of luck
SOURCE: chevy lumina, lost keys, broke ignition, need to fix the wires
Solder and shrink tubing work fine for that. That is for the pk2 theft module that tells the car that you are using the correct key with the chip in it.
SOURCE: how does the back seat of chevy cavalier car fold
the release for each part of the back seat is in the trunk, just behind the split in the seat. pull till you hear it release (clunk).
SOURCE: How does the back seats fold down in a 2004 Chevy
In the trunk on the top there are two straps that look like they go on a back pack, just behind the split in the seat. You need to pull those down and it undoes a latch on the back of the seats, which then you can fold them down. Good luck and enjoy your Cavalier.
SOURCE: Diagram of Serpentine Belt 1998 Chevy Cavalier
diagram should be on the radiator shroud / top of radiator
211 views
Usually answered in minutes!
×