1990 Mazda Protege Logo

Related Topics:

A
Anonymous Posted on Jun 23, 2012

Take door panel off a 1990 Mazda Protege passenger side.

Take the door panel apart on passenger side

4 Related Answers

Anonymous

  • 47 Answers
  • Posted on Jan 03, 2009

SOURCE: passenger side mirror, power, 2003 mazda Protege needs replaced

you need to remove plastic panel inside the door then you will find wireing plug undo and three bolts
to undo mirror ok m8

Ad

Anonymous

  • 840 Answers
  • Posted on Jan 24, 2009

SOURCE: left front door auto lock-unlock only buzzes. How remove door?

thei are screws in the door hidden by caps that you need to take off the door and near the mirror shoud pop off

Anonymous

  • 840 Answers
  • Posted on Jan 31, 2009

SOURCE: 2003 mazda protege, power door locks.

yes you do the ones in question/ Please rate my response thank you very much

Anonymous

  • 26 Answers
  • Posted on Feb 14, 2009

SOURCE: Mazda 5 replacing external handle on sliding door

Your door should be held on with clips. Removing the panel is sometimes hard, just take a good WIDE flat head screwdriver, and whatever tool needed to remove the screws holding the panel on, and be careful. Check underneath the panel, by the inside handle, and the arm point for screws. Once removed, take your WIDE screw driver, and don't quite pry them off, more or less try to get it underneath and pull towards yourself. There is no real easy way, just try to be patient with it, and if you hit any binds, look for more screws, its just a matter of patience for sure.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Window wont go up

Power window repair - Mazdas247




www.mazdas247.com > ... > Mazda Protege Forum > Protege How-To

Aug 8, 2005 - 10 posts - ‎10 authors

I have a 2002 and last week the driver's side power window died a horrible death. ... Check out my mods -> 2001 Mazda Protege LX aka Rum Runner ... My front pass sidewindow won't go up or down anymore. haven't taken ...


Passenger Window on 2007 CX-7 will not come up ...

2 posts

Nov 28, 2012


Driver's side window auto-up/down issues - Mazdas247

15 posts

Jun 10, 2011


Power Window Problem - Mazdas247

7 posts

Aug 9, 2009


Driver Side window controller won't work

14 posts

Nov 11, 2006


More results from www.mazdas247.com




2003 Mazda Protege 5 Replacing The Power Window Motor ...





? 7:02


https://www.youtube.com/watch?v=N3GP2UwTtAQ

Feb 3, 2015 - Uploaded by Steve K.

2003 Mazda Protege 5 Replacing The Power Window Motor and Regulator. Steve K. ... Looks like you just ...





Amazon.com: Dorman 741-741 Mazda Protege Fr


0helpful
1answer

How do I to get glass up on passenger side?

Your easiest solution is probably going to be taking the door apart from the inside (just a few screws) and setting the window back on the track.
1helpful
1answer

I have a 2003 Mazda Protege. The lock on the passenger door won't lock or open with remote. The others work fine. What is the problem?

I just fixed 2 of these on my son's car. We got 2 used operators from the pull-a-part auto wreck yard. We actually had the ones from the opposite side, so we uscrewed them (6 scres) and changed the nylon gear that usually has a broken shaft from operating in cold weather. Both work now. It takes more time to take off door panels and linkages, than to change the gear.
2helpful
1answer

How would i remove a left door panel on my mazda protege5?

If its a front door, you need to pop off the little panel inside of the mirror area. The there are several plastic clips that you pop out with screwdriver. There may be one with a philips head that can be unscrewed. Next you remove 2 or 3 screws from the door handle. Door handle has one side (usually front) that pops out first after screws are out. There may be 2 more screws under door handle if its a front door, not on rear door. Then you use a large screwdriver and pop out bottom sections of door and slide panel up to release the 2 locator pins on the top side of the door panel. These instructions are for 2001 Protege so it should be same for your car.
0helpful
1answer

How do I change the outside electric door mirror (passenger side) of a 2002 Protege? Thanks

You will have to remove the inner door panel. There is a screw in the door handle and one on the bottom of the door panel and the you will have to pull up and out with the door panel. After you get the panel off you should be able to see the mounting bolts and wires for the mirror assembly. Careful with the door panel i am not sure on the number of screws in it. It will pull out hard but should go up easy.
1helpful
1answer

Where is the computer in2002 mazda protege es

Generally, the PCM (computer) is located under the passenger-side floor slope, under a metal frame. You may want to remove the passenger-side kick plate plastic and peel back some of the carpet to revel it.

I hope this helps! :)
0helpful
1answer

Rear passenger turn signal won't work

make sure you have the correct replacement bulb for that car. Some bulbs do more than one thing.
0helpful
1answer

Left front door auto lock-unlock only buzzes. How remove door?

thei are screws in the door hidden by caps that you need to take off the door and near the mirror shoud pop off
4helpful
1answer

Passenger side mirror, power, 2003 mazda Protege needs replaced

you need to remove plastic panel inside the door then you will find wireing plug undo and three bolts
to undo mirror ok m8
Not finding what you are looking for?

64 views

Ask a Question

Usually answered in minutes!

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...