MY CLOCK AND LOWER CONSOLE COMPUTER QUIT ABOUT 2 YEARS AGO, AS DID THE REMOTE UNLOCKING OF MY CAR. IF I LOCK MY CAR, THE ALRM WILL WORK, BUT IF IT GOES OFF, I HAVE TO GO TO THE PASSENGER DOOR TO OPEN IT WITH MY KEY TO SHUT IT OFF, SINCE THE REMOTE NO LONGER WORKS.
The problem is the remote. What I think is happening.... is that the battery in the remote controls all those same functions that you are now manually controlling with your key. The reason the alarm works without the remote is that it is powered by the actvation of the power locks. Go put battery in your remote and I would just about guarantee you that everything will work the way it is supposed to... I wish you good luck. and God Bless\
SOURCE: CAN YOU TELL ME HOW TO USE A SLIM JIM TO UNLOCK JEEP GRAND CHEROKEE LAREDO. LOCKED KEYS IN CAR.
a slim jim is not a good ideal to be using in todays cars and trucks with airbags everywhere and wires inside doors..call a pro and if he pulls out a slim jim send him packin...there a re far better tools to use than a slim jim
SOURCE: alarm system goes off by itself
Your system may have a backup battery that has low voltage when the car is turned off. You may have to look under the dash to see if you can find the main computer for the alarm.
SOURCE: 2000 Jeep Grand Cherokee Laredo Door Locks Dont' Work Correctly
you need to check wiring between lf door and body..peel back rubber boot and pull on wires..you will find 1 or more broken wires..can be repaired
SOURCE: 1999 Jeep Grand Cherokee Laredo. The front left
Try the hazard switch.Do all the blinkers work?This may be a loose connection to the lamp.The window and lock system are on seperate circuits so very unlikely they are related.There is a seperate relay for the blinker and hazards,so a single blinker not working is either bulb or wiring.Widows are operated by motor so check the fuse, wires and and actuating switch. (Door trims off).Also check its not just jammed.Locks,check fuses,switch wires for damage or looseness and the actuator is working.Check the actu. rods are not loose are bent.(need the door trims off for this).Quite a few different things but hope this helps
197 views
Usually answered in minutes!
×