2006 Toyota Avalon XLS Logo
EMANUEL WIEDMAN Posted on Jun 22, 2012
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

2006 AVALON KEY IGNITION RED LIGHT FLASHING

AFTER TURNING IGNITION OFF AND LEAVING CAR ,ENGINE START STOP LIGHT CONTINUES TO FLASH RED

1 Answer

Marvin

Level 3:

An expert who has achieved level 3 by getting 1000 points

Top Expert:

An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

  • Toyota Master 85,242 Answers
  • Posted on Jun 22, 2012
Marvin
Toyota Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Top Expert:

An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

Joined: Jun 20, 2008
Answers
85242
Questions
28
Helped
29027275
Points
266281

Is this a new problem? I think it may be normal.

5 Related Answers

Anonymous

  • 1861 Answers
  • Posted on Nov 06, 2008

SOURCE: Flashing light shows a car and a keyh inside

Thank You Very Much for The Maintenance Required Light Info, as far as the flashing car w the key inside. I'm not sure what key we have? When we bought it it only came with one key so we tried to make a duplicate, which ended up not working because we later found out it needs a chip (or probably what I hear as the smart key?) If the light is supposed to be on (and normal) why does it need reset?

The Maint Reqd light blinks after 4,500 miles, and stays ON continuously after 5,000 miles. This is to remind you that you need an oil change. Give the info from you about your key, you do not have a smart key. You have a transponder key. Off topic, but, FYI, a Toyota dealer can program a transponder key for you.
Back to the Maint Reqd light. Here is how you reset it:
Turn the key on.
Make sure that the odometer reads "ODO", and displays the total mileage traveled...If it displays trip a or trip b, push the black button by the odometer to make the display read ODO.
Turn the key off.
Press and HOLD the black trip reset button until advised to release it.
Turn the key ON. (keep holding th reset button down)
Observe the odometer display.
you will see 5 dashes, 4 dashes, 3 dashes, 2 dashes, 11 dash, followed by five zeros, and the total mileage you started with will re-display.
Release the button.
Turn the key off.

Regarding the flashing light with the car & the key: This is the indicator to show potential theives thatyou vehicle has a sophosticated security system, and it CAN NOT be started by "hot-wiring" it. The flashing light is normal, and consumes no battery power. I hope that this helps you understand these two items better. Thanks for choosing FixYA, and the graciousness of a FixYa rating for my solution to you would be greatly appreciated. Glad to be of assistance; please feel free to call upon me anytime. Have a great day.

Ad

Anonymous

  • 1861 Answers
  • Posted on Dec 16, 2008

SOURCE: toyota avalon 2006 key fob apparently doesn't work

It looks like you have the "Smart Key" (a small rectangular box) that does not look like a traditional key.
What you also have is a dead battery inside the Smart Key.
Look closely at the box; there is a little button on the side. Press it. This will release a small hidden key. After you remove the small key, use a small flat blade screwdriver to pry the case of the box open at the slot provided. Take the unit to a store that sells miniature batteries, and have it replaced. You will NOT have to reprogram it after the battery is changed. The life span of the miniature batteries is roughly 20 months, less if exposed to RFI, like sitting on a TV, a monitor, or other electrical device. The Smart key TRANSMITS all of the time, even when you do not press the buttons. This is why the battery only lasts 18-20 months. Let me know if this fixes your issue..

Anonymous

  • 1 Answer
  • Posted on Jan 12, 2009

SOURCE: ignition locked; dash light of car outline with key inside flashs

Get the steering wheel to move even just a little bit and it will unlock.

Anonymous

  • 150 Answers
  • Posted on Nov 02, 2008

SOURCE: Cannot turn off security Alarm

If this is a factory alarm try using the the key in the door lock and turning the door lock manually. I have seen this issue in chrysler models as well. If this does not work try replacing the batteries in the key fob as this will cause falfunctions as well.

Anonymous

  • 2004 Answers
  • Posted on Mar 21, 2009

SOURCE: vsc vsc off check engine

Disconnect your battery for 10 minutes after which you connect it back the lights should go off. Don't report to toyota. Nigerian style!

Rate this............

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2006 Toyota Avalon, red flashing icon "key" when the key is not in the ignition. How is it reset?

That's normal. It is indicating your ignition security system is activated and your key is required to start the key or deactivate the security. There is nothing to "reset". If the red light is not flashing when the key is not in the ignition, then there is something wrong with your ignition security system.
tip

How to reset AIRBAG SRS Light on 2003 - 2006 Infiniti G35 Coupe

Hi, on most vehicles, the airbag light should come on for at 6 seconds, and then go off if the system is working properly. If there is a fault or a problem in the system, the light will remain illuminated, or flash continuously. If the airbag light does not work properly, some vehicles have an audible tone that sounds indicating a problem with the airbag light system. When the light is on (or the tone is sounding), the airbag will NOT deploy, even in an accident. <br /> The flashing light on your car is telling there is a problem. <br /> <br /> <b>How to reset AIRBAG SRS Light on 2003 - 2006 Infiniti G35 Coupe </b> <br /> Ignition Key Method: <br /> <ul> <li>Turn IGNITION on (but don't start car).</li> <li>After the AIR BAG warning lamp lights for 7 seconds, turn IGNITION off within 1 second.</li> <li>Wait 4 seconds.</li> <li>Turn IGNITION on (but don't start car).</li> <li>After the AIR BAG warning lamp lights for 7 seconds, turn IGNITION off within 1 second.</li> <li>Wait 4 seconds.</li> <li>Turn IGNITION on (but don't start car).</li> <li>After the AIR BAG warning lamp lights for 7 seconds, turn IGNITION off within 1 second.</li> <li>Wait 4 seconds.</li> <li>Turn IGNITION on (but don't start car).</li> <li>Wait 3 seconds.</li> <li>Turn IGNITION off.</li> <li>Wait 2 seconds.</li> <li>START Car (the light may be blinking slower than before).</li> <li>Wait 3 seconds.</li> <li>Turn IGNITION off.</li> <li>Wait 3 seconds.</li> <li>START Car.</li></ul> <br /> <b>This is a little easier</b> To reset the light simply turn the iginition to the on position, (you dont need to start it). All the lights should stay on for thier diagnostic check. As soon as the airbag light goes off, before it starts flashing, immeditatly turn the car off. Repeat this 3 or 4 times (turning to on then off) and the light should go away
1helpful
3answers

Corsa utility 1.4 failing to start and it is not giving a spark. it flashes the spanner light about 5 second after turning the key on please tell me what is the problem

Hello Sibusiso,

(From the 2009 Corsa Owners Manual)

Your Immobilizer system checks whether the engine is allowed to start with the key being used. If the transponder in the key is recognised, the engine can be started.

The electronic immobiliser activates itself automatically after the key has been removed from the ignition switch. If control indicator "spanner light" flashes when the ignition is on, there is a fault in the system; the engine cannot be started.

Switch off the ignition and then repeat the start attempt.
If the control indicator continues flashing, attempt to start the engine using the spare key and seek the assistance of a workshop.

See 2009 Owners Manual at the link below.


https://www.vauxhall.co.uk/content/dam/Vauxhall/Europe/united_kingdom/nscwebsite/uk/00_Home/Owner_Services/owners_manuals/corsa/CorsaOwnersManual_Jan09.pdf
0helpful
1answer
0helpful
1answer

Why does the red light om my 2002 crown vic flash fast when I attemp to start it

Which red light? The one on top of the dash? If so, there are two cases where that light will flash rapidly: If you use the wrong programmed key, it will immediately start flashing rapidly when you turn on the ignition and try to start the car. If the light is steady and then starts flashing rapidly after a few seconds when you turn on the ignition or try to start the car, you are using the correct programmed key but the engine computer has a problem or has failed.
0helpful
1answer

How to change ignition key for 2006 chevy cobalt

remove the plastic cover from the steering colum then you will see the switch on the left side remove the 2 screws you will need to turn the key to release the switch reverse to put together then you will need to relearn the switch to the body control module this is done by turning to crank and leaving it in the run position til the security light stops flashing you will need to do this three time after the third time remove the key for a min then start the car if possible but on a battery charger if the battery goes died during the relearn you will need to start over
0helpful
1answer

Ignition on and nothing happens, checked battery and is charged checked all fuses and breakers and all are ok, got underneath car and shorted across the starter solenoid end the engine would turn over but...

You may have a security system problem (Most likely caused by an ignition lock cylinder fault)

Is your SECURITY light flashing?

If so, do this:

Turn the ignition switch to the START position then release the key, leaving it in the RUN position.
Wait approximately 10 minutes untill the security light stops flashing, then without turning the key off, turn it to the START position again. It should start. If it does, then you should probably replace your ignition lock cylinder. The problem will gradually get worse until this method no longer works.
1helpful
1answer

A red flashing car shape light flashing on my 06 toyota sienna van?

Is the immobilizer, if there is no key in the ignition is ok if flashes, if it flashes when the key is in the ignition the key is bad car wont start.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/flavio_517b938f50183b92

6helpful
2answers

1996 Oldsmobile Achieva: Security light flashes upon startup

Here is what you do, but only when the SECURITY light flashes - if it is always ON or OFF it's no use.
Turn the key in the ignition to ON.
Wait for exactly 10 minutes ( SECURITY light will flash for 10 minutes and then stay on SOLID)
Turn the key to OFF
Wait 5 seconds.
Turn the key in the ignition to ON.
Wait for exactly 10 minutes.
Turn the key to OFF
Wait 5 seconds.
Turn the key in the ignition to ON.
Wait for exactly 10 minutes.
Turn the ignition OFF.

Start the car normally.
It has relearnt the keycode and you're good to go.
NOTICE - it takes 30 minutes to relearn, that's THREE cycles of ON - 10 minutes - OFF.

Good luck.
0helpful
1answer

Key stuck in ignition

Be sure its all the way in park or try neutral.Its possible that security system does not recognize the key. Is security light flashing or on steady? Shut all doors and windows,trunk,hood, turn off all accessory's,roll down drivers window, turn key off and remove for at least 1 minute, insert key into ignition, try to start leaving key to run position for 20 minutes, turn key to off,wait 15 seconds, try to start again leaving key to run, wait 20 minutes, turn key off,wait 15 seconds, try to start, again leaving key to run, wait 20 minutes, turn key off, wait 15 seconds, try to start. This should relearn key code. It may relearn after 1 learn cycle and start if system is ok. Hope this helps and that the weather is dry and warm for this procedure! This is not always a fix, but works most of the time.
Not finding what you are looking for?

3,757 views

Ask a Question

Usually answered in minutes!

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...