Check Engine Light Code 332

Mercury Grand Marquis diagnostic code 33 Questions ...

www.fixya.com > ... > diagnostic code 33 > Cars & Trucks > Mercury

Mercury Grand Marquis cars & trucks diagnostic code 33 questions and ... 2006Mercury Grand Marquis air bag light flashes ... What does code po1151 mean.

2006 Mercury Grand Marquis air bag light flashes three ...

www.fixya.com/.../t19845434-2006_mercury_grand_marquis_air_bag_l...

Sep 3, 2013 - It then stay on. I assume - Mercury 2006 Grand Marquis question. ...What does a flashing air bag light mean on a 1993 Grand Marquis? Jul 23 ...

Mercury Grand Marquis airbag code 33 Questions ... - Fixya

www.fixya.com > ... > Tags > airbag code 33 > Cars & Trucks > Mercury

Mercury Grand Marquis cars & trucks airbag code 33 questions and answers. ... What does a flashing air ... 2006 Mercury Grand Marquis air bag light flashes.Missing: mean

Look at this page
Mercury Check Engine Light Codes Welcome to the Mercury Check Engine Light...

this means code 51- Denny

You got a problem,you know that for sure

Why are you using it with a braking issue?

You got a check light on
Have you not checked for codes,I mean check lights
have been with us for over 30 years,nothing new there

You have an ABS Braking System problem

Have to retrieve the codes before you
do anything else & resolve code related
issues first

Since you have an obd1 car, you will need a repair shop
to check for codes & resolve

I'm giving you these codes from a haynes manual,
326 EGR circuit voltage lower than expected

327 EGR valve pressure transducer/position sensor circuit below minimum voltage

332 EGR valve opening not detected

337 EGR valve pressure transducer/position sensor circuit above maximun voltage

code 34 means you are not getting any egr flow. find your egr valve and check to see if vacume hose is attached, if so follow the hose to the egr solenoid which should have that hose and a direct vac hose going to it. and an electrical connector. make sure all of these things are in place and not disconected or broken. the most likely cause is either a broken vacume hose or a clogged intake manifold.

means your egr is malfuctioning or needs to be cleaned. the high imput means the egr is allowing for exhast gases into the combustion chamber and the map code is caused by the egr as well.

The Egr ports are plugged in the intake. Remove the throttle body elbow behind the throttle body, and clean out the carbon. I can walk you through it if you need me too. This is common on the 4.6

its the tube going from the egr valve to your exhaust it have carbon build up and you either have to replace it or get a metal coat hanger and clean it out.