Question about 2003 Subaru Forester
Noticed my fog lights were on, and I could not shut them off from the steering column. That ended up draining the battery. After I recharged the batter the light being on persist. I pulled out fuse 15A behind the coin tray to see if that would resolve the issue. No luck. Any Ideas?? Thanks
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Check the Headlight Switch. If your headlights come on automatically check the headlight sensor and its associated relay.
Posted on Mar 26, 2009
2005 Forester - It is easiest to remove the fog assembly.
1. From underneath the vehicle pry out one plastic fastener to be able to bend the light weight plastic mud protector downward. You will see the underside of the fog light assembly with one 10mm bolt directly above you. Remove this bolt.
2. From the front of the vehicle unscrew one 10mm bolt at top of fog light (this is the shorter of the 2 by the way) and pry out one plastic rivet adjacent to it.
3. Carefully remove the fog assembly and disconnect 2-pin power connector by pulling up on the release. Carefully wiggle the housing out (no force req'd).
4. Unscrew the back from the housing and replace H3 bulbs. Take care not to touch the bulb while replacing.
5. Reverse to install.
Should take an hour at most.
Posted on Dec 31, 2009
Tips for a great answer:
Aug 05, 2018 | Subaru Cars & Trucks
Jun 07, 2015 | 2010 Subaru Forester
Mar 12, 2015 | 2006 Subaru Forester
Jul 27, 2011 | Subaru Forester Cars & Trucks
Dec 15, 2009 | 2005 Subaru Forester
Oct 11, 2009 | 1998 Subaru Forester
Apr 29, 2009 | Renault 181 Cars & Trucks
Apr 24, 2009 | 1998 Subaru Forester
Apr 01, 2009 | 2005 Subaru Outback
102 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: