1997 Chevrolet C1500 Logo

Related Topics:

Keith Hannon Posted on Oct 07, 2017

1997 chevy c1500 truck stalls when antilock light comes on

I'll be driving and the truck will just lose all power for a split second and the antilock light and e brake light will come sometimes they will go of right away but sometimes the antilock will stay on for a few minutes.It has been doing it for about 8 months but is happening more and more.also lately when it happens my truck sometimes stalls.

5 Related Answers

Anonymous

  • 12 Answers
  • Posted on Nov 27, 2008

SOURCE: knock sensor for 1997 chevy C1500 Pickup Truck

Located on right hand side of block (pass side). It is between motor mount and starter.

Ad

Anonymous

  • 2 Answers
  • Posted on Sep 29, 2008

SOURCE: I have a 1995 Chevy

i have a 95 k2500 350 just put in a new tranny and less than 90days later there is little to no pressure. Thinking it is a bad pump but could be the ecu thing as well since the previous tranny went out the same way. If you know where to locate it any help would be great! c = 2wd k = 4wd

Anonymous

  • 1 Answer
  • Posted on Apr 29, 2009

SOURCE: 1997 Cavalier while you driving hesitates and stall

I had to replace my Idle Air Control Valve and Throttle Position Sensor.

Anonymous

  • 1 Answer
  • Posted on Aug 14, 2009

SOURCE: Reduced power code comes up and my truck stalls.

I had the same problem, and the solution was cleaning the throttle body, it does need to be completely removed to be cleaned thoroughly. I just used some brake cleaner on a rag to clean off all the carbon deposits. A friend of mine who is a dealer tech had only seen this trouble code once, and this was the solution. So far, my light has not come back on and the truck is running alot better at idle.

Anonymous

  • 1 Answer
  • Posted on Aug 24, 2009

SOURCE: Rough idle

I had the same exact problem on my 2004 Colorado (3.5L). Cleaned the MAF sensor (with MAF sensor cleaner) and throttle body/plate - cleared it right up.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

I have a 1995 chevy c1500 and when I'm driving I

Try out this to get a solution
this website here, it's very helpful in repairing your vehicle
reliable-store com. They also have live chat feature to guide you
also try manualslife com
both are really good in repairing stuff
0helpful
1answer

I have 1997 chevy c1500. The brake lights work. The reverse lights don't work. I replaced the bulbs, not the problem. I checked the fuse, not the problem. What else can I do to fix this problem??

Do you have power coming out of the reverse circuit on the neutral safety switch ? Or the reverse switch if the truck has a manual trans ?
0helpful
1answer

When i push clutch in it makes a grinding noise.Hard to shift into first.When i come to a stop it acts like it wants to stall

Sounds like the clutch release plate or release bearing are damage or disintegrated. Because one or both of these parts are damaged the clutch does not properly disengage which will result in crunching gear changes at slow speed and also clutch dragging at lights (wanting to stall) etc.

You'll need to split the transmission from the engine block to investigate.
3helpful
2answers

How to fix 2002 toyota camry hard steering

Check the power steering fluid levels. Also the pump may need replacing if it isn't delivering enough hydraulic pressure to the steering box. Be sure to lube all the steering components on the chassis if possible.
0helpful
1answer

I have a 1997 chevy Suburban 350 5.7 vortek motor with "check engine" ligth on i put a code reader an say code P1345 ,change the whole distribuitor,crank shaft sensor,spark plugs cables an...

its a cam sensor corilation to so try replaceing that as well but if you want light off disconnect battery for ten seconds but if problem still persist the light will eventually come back on.
0helpful
1answer
0helpful
1answer

Tach. drop's to zero while driving 70 ?

I have had the almost same problem twice. A 'thump', like the engine missed a fire and tach drops. Seems OK after restart. Electrical? Timing chain slip?
Has 135,000 mile. Any clues?
1helpful
3answers
0helpful
1answer

Engine stalls when driving & loses power

You have to reset your computer. In the engine compartment, left side on the strut well, is a black fuse box. You must remove the 10 amp hazard fuse for ten (10) seconds and then reinstall. That should make your CHECK ENGINE light go out. You do need to ascertain why it's coming on though.
0helpful
1answer

1997 3rd brake cargo light

white wire makes the light come on with dome lights, orange wire should be constant power, black is ground and blue w/white should go directly to the brake light switch, both white should be the same connection if problems let me know
Not finding what you are looking for?

156 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...