At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The cost of installing a car alarm in a 1986 Chevrolet Caprice can vary depending on several factors, including the type of alarm system, the complexity of the installation, and the location where the installation is being done. Here are some general guidelines on what to expect for the cost of installation:
Type of alarm system: Basic car alarm systems can range from $50 to $200, while more advanced systems with features like remote start or GPS tracking can cost up to $1,000 or more.
Complexity of installation: The more complex the installation, the more labor-intensive it will be, which can increase the cost. For example, if the alarm system requires extensive wiring or modifications to the car's electrical system, the installation will take longer and be more expensive.
Location of installation: The cost of installation can also vary depending on where the work is being done. Installation at a car dealership or specialized car audio shop may be more expensive than a local mechanic or electronics store.
Overall, the cost of installing a car alarm in a 1986 Chevrolet Caprice can range from around $100 to $500 or more, depending on the factors mentioned above. It's recommended to get quotes from several different installation providers to compare costs and ensure you're getting a fair price.
well first off, you need to verify that your alarm is indeed the problem. I have been an alarm installer for thirty years and very seldom the alarm is the issue. If you give me some info, I can be more helpful. year make model, when alarm was installed, and exact symptoms. Chances are you have issues with your battery cables.
these alarms are tough with out some testing, check all the fuses and make sure the alarm module is powered up.Check to make sure the regular horn still works and open the hood and test the hood pin for the alarm, make sure wire to pin is good and switch pin is good, i will also need to know if the alarm is a factory installed alarm (dealer) or an aftermarket alarm. The diffrence is a aftermarket alarm is an alarm that was installed after the car was bought , like at a alarm shop or other place. a factory alarm is an alarm that came with car from factory.
I don't think that the alarm can be bypassed once installed. So you'll have to contact the aftermarket car alarm installer that put it in to try to get a new fob that will work with it, or else have it uninstalled by an alarm dealer.
I think the wires need to be traced to deactivate the alarm system, one way or another, because most alarms cut into the ignition or start wiring to prevent the vehicle from running.
If the alarm is for short period, it is just normal for proximity sensor and vibration sensor types. If this alarm for long period, then car alarm installation needs to be checked by the technician installing the alarm. Send us your e-mail comment.
take it to another suzki dealer cause if u hear an alarm going off and they say your car does not have a factory alarm this is a major issue ethier the guy looking at the car at the dealership does not know much about alarms or he is just a salesmen i know some suzuki Forenza come with factory alarms
More than likely it's a botched alarm install. There are several sitches that control the overhead lamp inside your car, as well these wires need to get thier elecrical current from the battery. There are several wire " clusters " behind your dash panel, and more than likely, when the alarm was install after-market, the installer wired the alarms " armed " signal lead to the wrong wire behind your dash, or in the fuse box itself (i've seen some rediculouse wiring jobs)
Your best solution is to find out the exact model of alarm that was installed, and try to obtain the installation documentation, as well as get the manual for your car, and check that the woring of your alarm is correct for your model / make / year of car.
I'll almost bet you money, it will be as simple as clipping one wire, and wiring it to the correct wire.
The flashing light does not mean you have an alarm. They were not standard in the 3-series.
You can get one installed or if you want the dealer can program the lights to flash when locking and unlocking doors even with out alarm. This is called "acknowledgement without DWA"
×