My 1996 Chevy Blazer blower isn't blowing air. Fuse is ok. What next?

SOURCE: Chevy Aveo 2005 ac and heat are not blowing out.

I'm having the same problem right now. Although mine started a couple years ago. At first you had to slam a door, hit the dash, hit a bump,etc., and it would start blowing again. I replaced the fuse thinking it would fix it because I heard clicking from the fuse.(wasn't the problem) then figured out as long as I didn't turn it off, it would be fine the next time I drove the car. But if you turned heat/ac off, the next time I got in the car, I'd have to slam the door, etc. for it to work again. After the intial incident, it's been fine until now(again, 2 yrs. later). I have now order the blower motor from Chevy(everything for this car is *special order*) so you may want to start there. Good luck!

SOURCE: 1996 chevy blazer my air on heater will not blow

the idea of the switch is run on vacuum and is not making contact with the switch it self either worn contacts in the switch itself **** as an obstruction as well or the vent door is stuck in just that position either behind the glove box or the ash tray are the vacuum lines one of them may be pinched off or the door needs a bit of help until you can free it up

SOURCE: 1996 chevy s10 heater not blowing hot air

heater core or leak on cooling system

SOURCE: 97 chevy blazer ac only blows thru defroster &

check the vent door for proper operation

SOURCE: on my 1996 chevy blazer the hatch won't unlock

It should be number 2 in the fuse box but if you can still hear the motor when you push the button than you need to try and pull the top where the lock that holds the glass hatch pull the plastic far enough to get you hand in on the right side of the latch and you will find a lever that you should be able to push to your left I believe and that will release the glass hatch and than open the tail gate take off the plastic inside cover and unscrew the metal plate off of the inside of the tail gate and you will be looking for a blue plastic piece that supposed to be connected to the release motor and the latch if thats broken than you need to go to the auto wreckers find a blazer or jimmy from '95-'97 maybe all the way up to 2000 I believe and basicly do the same remove the blue clip from that one put it on yours and it should work and if the clip on your is broken dont try to glue it, it wont work I tryed everything to try and fix it on mine but you have to get another one once you find another clip it doesnt really take long but yea anyways I hope that helps you out let me know heres my email [email protected]