At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
P0700 code is a generic code for Transmission Control System Malfunction
P1776code means your solenoid switch valve is stuck in low reverse. (DTC 47) A stuck solenoid switch valve is a common occurrence in the valve body of the Dodge 41te transmission.
The first step would be to check the wiring to the solenoid from the TCM, then maybe try a new solenoid pack if the wiring is determined to be fine.
P0700 is an alert code the p1776 is the actual trouble code.
Code p1776 is solenoid switch valve latched in low/reverse position. Valve is located in valve body not solenoid body reploace it
P0700 is EATX code present.
It simply means that the engine computer has noticed that the transmission computer has a dtc in it. This causes the Pcm (engine computer) to turn the check engine light on. You will need to have the TCM (trans computer) checked for codes to know what to diagnose.
error code P1776 - Replace rear solenoid switch
Likely both related The P1776 probably kicked off the P0700 notification.
(DTC) CODE # P0700....Transmission Control System (MIL Request)
Translation: Transmission Control Module (TCM) Malfunction or Failure.
P0700 Information Code
The Transaxle Control Module (TCM) monitors the malfunction of sensors and actuators relating to transaxle control. If any malfunction is detected, the TCM informs the PCM by sending a signal (P0700 code). P0700 means that a code has been set in the TCM.
This code is for information ONLY. If this code is present, check for transaxle codes.
P1776:
Solenoid Switch Valve Latched in Low/Reverse Position.
The TCM monitors the L/R solenoid to ensure that the fluid transfer happens. It uses a Pressure switch to verify this. Usually this code is set by a switch that is stuck or a solenoid that is not mechanically operating.
A transmission shop would be better suited for this type of work.
×