The Starter is right next to the oil filter in a 1996 Nissan Sentra. You will need a floor jack and two jack stands. To Remove: Disconnect Negative Terminal From Battery. Then, get under the car, and disconnect the electrial connector (easier with a slotted screwdriver) Then using a 12 or 14mm socket, remove the bolt you can see mounting the starter to the engine. Now, pop open the hood. Get a deep socket, knuckle joint, extensions, etc. From above, you will remove the second and last bolt. If done properly, you should finish within 2+ hours.
Custom Car Body Kits
207 views
Usually answered in minutes!
×