First pop the hood and locate the water pump pulley. drain the coolant into a suitable container. there will be alot of it so get a big container.use the correct size socket and loosen the four small bolts on the pulley.DO NOT TAKE THEM ALL THE WAY OUT YET. find the tensioner pulley and put a socket on the bolt and lift the pulley to release the pressure on the fan belt and slip it off the water pump pulley.now remove the bolts from the water pump pulley. now all you have to do is remove the bolts that attach the pump to the engine block. remove the pump and clean the surface of the the engine block where the pump connects to the block. don't scratch the matting surface of the block.oh disconnect the coolant hoses that attach to the water pump.BE CAREFUL THE COOLANT WILL DRAIN OUT OF THE BLOCK AND HOSES. DOGS AND CATS ARE ATTRACTED TO THE COOLANT, IT WILL KILL THEM IF THEY DRINK IT.have fun
SOURCE: 1991 oldsmobile 98 fuel filter replacement location?
my fuel filter is located right behind the pass side tire on the inner side of the frame.
SOURCE: 98 olds regency fuel relay were is it
its under hood on side panel it's black take top off look for relay that says fuel
SOURCE: 1995 Olds 98 Regency Elite I'm re-attaching rear
there is a small set screw in the base of the mirror you will need to loosen this and then slide the metal plate out.
SOURCE: how to change the water pump on 93 olds 98
remove serp. belt put jack under engine use a piece of wood and lift engine a little and remove motor mount remove water pump clean surface and install water pump and reassemble
SOURCE: I have an 89 Olds 98 Regency. The fuel pump comes
The fuel pump will come on then, shut off when the key is placed in the ON position, this is normal. What is not normal, is when the key is turned to start the engine, and the fuel pump does not run when the engine is running at the same time. The initial power up you hear is a prime function that all vehicles have.
664 views
Usually answered in minutes!
×