Immobilized, very possible, do all dash gizmos come on? Did start once or twice then stop?
Hey guys. I own a 2013 lancer ES. My remote key fob stopped working because the battery ran out. I replaced the battery and it doesn`t lock and unlock the doors anymore. The fob because its lights come on and a locksmith checked that and it`s definitely working. I checked the WEB and youtube for reprogramming but all the tutorials were for 05-12 models. I also did the manual instructions but nothing happened. The dealership told me they charge me 220 dollars for that. I only have one fob, it is the only i got from the previous owner. Would you plz help me? thanks
SOURCE: I just bought a 2006 mitsubishi otlander and the
Take it to the dealer and have the key fob re-coded. Sounds like it lost it code for whatever reason.
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/matthew_d24b835e574ef6ca
SOURCE: lancer key fob not working after new battery?
Chances are, the car may have to be "re-trained" with your key fob. Your best bet here is to take it to the dealer so they can re-train it for you. Before you do that though, make sure there aren't instructions in the owners manual on how to do so.
I hope this helps! :)
SOURCE: The battery in my key fob for my 2004 Mitsubishi
1-insert and remove key from ignition two times
2-close and open driver door two times
3-insert and remove key once from ign.
4-close and open drvr door twice
5-insert key into ign.,then close driver door
6-turn key to on (not start) then off, twice this is rewrite mode,have all remotes to reprogram it will clear any lost remotes.
7-remove key from ignition,the door locks should cycle twice.if not start over.it may take a few tries.
8-press lock/unlock together and hold for a second
9-release,and press lock on remote,the door locks will cycle
confirming program.continue to do other remotes you have,steps 8 and
9.if only one in possession,you are done. To end mode open door or insert key into ignition.
You'll need to follow the steps with no more than a 1-2 second delay between each step.. hope it works
SOURCE: how do you re-link the key fob to the car after
Try this,,turn the key on ,wait 10 minutes,then turn the key off,then right back on,do this three times,a total of 30 minutes,this should reset the key fob,if this is the problem.
2,917 views
Usually answered in minutes!
×