JAGUAR XJS 1988 ELECTRICAL WIRING DIAGRAM - 1988 Jaguar XJ6

SOURCE: Need a wiring diagram from 1997 Jaguar XJ 3.2

See here.

SOURCE: 1994 Jaguar XJS CLUTCH

hi mate cet the number for gmf car spares they will help general motor factors

SOURCE: 1988 Jaguar Vanden replace headlight

What you need to do is remove the 2 screws on the top bezel from inside the engine bay, then underneath the outer corner of the plastic headlamp surround there is a philips screw, (put your head under neath car near from wheel) loosen the screw, do not remove it, now the headlamp plastic bezel/surround will come free enough so you can get a philips screwdriver in through the middle of the headlamp surround, there is a chrome retaining ring holding the headlamp in place, loosen the 3 philips screws (do not remove) The retaining ring will rotate and you can slide the ring out from the outer edge of the headlamp surround. The headlamp will then come out throught the middle of the surround, disconnect the 3 pin multiplug and reverse process for install.

James Bradburn

• 299 Answers
• Posted on Jan 19, 2009

SOURCE: 1989 jaguar xjs front door lock assembly?

You may find it in this document if you download it.

www.arh.ee/jaguar/Xjs_help.doc

SOURCE: ive recently bought a 1988

Amazing cars and fun too! It is not uncommon for these motors to fail. Sometimes if you smack the door just right or try to activate the window switch while closing the door. If it activates, replace the window motors. If you have a volt meter, you can remove the door panels and check to see if you are getting voltage to the motors while activating the switch. Let me know.