Wher is radiator fan sensor switch on A1995 peugeot 405 1.9TDI ESTATE

SOURCE: over heating problem on a peugeot 406lx estate

its on the thermostat houseing.

Colin Stickland

• 22516 Answers
• Posted on Oct 30, 2009

SOURCE: Peugeot 406 Estate diesel HDI 90. The heater

switch has broke inside itself

SOURCE: i need to fit a fan belt on a peugeot 306 estate

just in front of the altenator, there is a 10mm bolt, tighten that and it will tighten the fan belt .
these belts are quite tight, make sure the one you have is the correct length, sometimes the suppliers will send one that is close to the correct size, and is sometimes a few milimeters smaller.

You dont normally have to loosen anything else, but the easiest way is to put the belt on the alternator, tensioner and power steering first, then ease the belt over the ridge of the crankshaft last, one rib at a time, but evenly all the way around the pulley.


for more step by step instructions with proper diagram please click on this link directly
http://www.howtodothings.com/automotive/a3038-how-to-replace-a-fan-belt.html
---------
this will help.thanks.