Neeed torque wrench settings for Suzuki Wagon R MB-61S-105796 with K 10A motor need Cylinderhead setting, cambearing cap setting flywheel setting and valve clearances please

SOURCE: suzuki wagon r car horn

hi all the horn is located on the left hand side at front of engine, the terminal 2 of them were very greasy and oily, so i unplugged them and cleaned all the **** off them and inside the terminal as well with a tooth brush. put them back on and wow a lovely sounding horn, now this is for suzuki wagon

SOURCE: OBD gave code for camshaft position sensor-how to replace?

haynes should have a manual on this car, which will show the location of the cam pos sensor. check autozone or napa

Johnny Brown

• 5763 Answers
• Posted on Nov 28, 2009

SOURCE: Valve Clearance

valve clearance, with engine hot, intake valves are .005-.006 in, exhaust valves are .011 in, if engine is cold then its intake .009-.011 in and exhaust is .007. hope this helps good luck.

SOURCE: suzuki vitara 1993 camshaft bolt torque settings

Camshaft bolt sprocket
Torque - 41 - 47 Ft lbs.

Testimonial: "great thanks for the info"

SOURCE: how to change fule filter on suzuki wagon r+ 1.2

May be near the tank if it's external OR inside the fuel tank.