Need torque wrench settings K10A turbo 996cc Suzuki wagon R Cylinder head, flywheel, camshaft caps, and valve clearances
Posted by Bob kelly on May 30, 2012
SOURCE: OBD gave code for camshaft position sensor-how to replace?
haynes should have a manual on this car, which will show the location of the cam pos sensor. check autozone or napa
SOURCE: suzuki wagon r car horn
I have wagon r 2005 model last night my car would not start can the batteryy die out all of sudden. Which one to buy now. A mechanic identified today that the bat is gone. thanks
SOURCE: What are the torque settings to tighten the head
3 step torque: 25 Ft-lb, 35 Ft-lb, 50 Ft-lb.
Valve lash: Both for intake and exhaust: 0.15 MM
Testimonial: "Great , many thanks"
SOURCE: Valve Clearance
valve clearance, with engine hot, intake valves are .005-.006 in, exhaust valves are .011 in, if engine is cold then its intake .009-.011 in and exhaust is .007. hope this helps good luck.
425 views
Usually answered in minutes!
Which engine do you have (ie.. size in Liters) ?
×