The Tail lights - brake lights and rear indicators are not working at all. the fuses and bulbs are fine. The brake light on my rear window still works
Make sure all the wires are pluged into the light fixtures and that there not corroded
I have checked and double checked connections and replaced current bulbs with new ones, also checked and double checked fuse and panel, also thought maybe fuse panel may be mis labelled however these things did not change the results. Bright side is there are a ton of clean parts on the car , now if they would just work. Lol
×
SOURCE: 2003 gmc envoy xl brake lights dont work
sounds like a fuse look under the dash panel for fuse cover look at the back of cover and check that fuseThanks for using fix ya Please rate my response thank you very much
SOURCE: 2003 gmc envoy xl brake lights dont work
theres usually a pressure switch behind the brake pedal, sometimes the plastic hex nut rattles loose and you have to retighten it.
SOURCE: 2005 Toyota Sienna rear brake light problem.
have you checked the earthing continuity-if it's this other bulbs may also partly light when brakes used
otherwise-
Check continuity of live from center to lh & rh lights and/or is there a live at those lights
SOURCE: 2006 ford e250 van\r\rear tail lights dimmed and now dont work(.)
check the fuses and relays under the hood next to the battery. if they still dont work it might be in the wiring or if it has a tow package it might be in the trailer wiring
SOURCE: Brakes Lights dont work on a 2006 Chevy Silverado
I've worked on these the first drove me crazy. its the turn signal switch every thing runs thru these. head lights, turn signal, brakes. except the third brake light. it runs directly from the brake switch. go figuare
645 views
Usually answered in minutes!
×