How do you remove a power window switch from a 1996 bmw z3

SOURCE: Will the wheels from a BMW Z3 M fit a 1999 BMW Z3 2.8 ltr roadster?

yes they will you just may need to use a wheel spacer

SOURCE: I need to replace the fan clutch on my 2001 bmw z3 3.0i

There are two little fasteners at the top side end of either side of the shroud. Just take a very small flat-head screwdriver and pry out the middle pin part (they are just pressed in anyway) and take the outer part. Don't lose them as they should be reusable (unlessed you monkeyed them out with channel-locks, haha). Then slide the shroud up to unhook it from the top AND bottom (note where it hooks at the bottom when you go to put it back in). The fan needs to be unbolted now so the whole thing can be slid out as one piece.

Put some nice pulleys on while you are in there!

SOURCE: what is the normal price for a 1996 bmw z3 hood

should be around $400

SOURCE: bmw z3 passenger seat goes forward backwards but

It can also be theseat motor since there is seperate motors for up/down & forward/backwards. You can test the switch to see if you are getting power to the connector on the motor by using a multimeter.

If there is power to the motor, I would remove the motor and give it a tap on the ground. Alot of the time the motor is fine, and the tap will free it up again. If it doesn't work you may be up for a new seat motor. Giving mine a tap solved the issue with mine.

SOURCE: 1996 BMW Z3 trunk wont open with key

It may be that the rod from the lock tumbler to the latch may have come loose.