How do You replace bushings in a Cadillac Rear Knuckle?

These bushings press out of the knuckle in only one direction yes they are replaceable and available for aftermarket you can call me 1-270-746-9850 and i can explain how to press them in and out had the same problem with my secretary's caddy and we replaced them and no problems since


Thanks

The Brass is Bronze and provides protection AGAINST CORROSION for the apprentice who knows everything...!!! Last Shot Auto Parts Designed a sucessful part modeled exactly as Prior Cadillac Models and it is specific to the DIRECT APPLICATION of the BUSHINGS required by GM ENGINEERS !!!!

Waltons Mfg parts will not hold up with flexing the urethane....... they tell you to lower the assembly to ride conditions then tighten !!???!!! With the Last Shot Auto Parts LLC the Upper Bushing Rotates as it should on the 954 Bronze Bearing Bushing ( by the way it is the same material used for your rod bearings in the motor !!)

POLYurethane parts won't last !! SECONDLY CERTIFIED MECHANICS WON'T INSTALL THEM FOR YOU FOR A REASON !!! THEY DON'T WANT TO BE LIABLE!!

All of it documented and Patented !! PAT PENDING on both Bushings for a reason !! THEY WORK THE BEST !!

CHECK OUT "LSAPLLC" ON EBAY AND SEE THE FEEDBACK FOR YOURSELF

WE HAVE THE ONLY PRODUCT PATENTED DIRECTLY FOR THE APPLICATION ......

WHY MESS WITH THE REST..... WHEN YOU CAN HAVE THE BEST ? ! !

Try Last Shot Auto Parts, LLC they sell on ebay as lsapllc they say they are located in flint , MI, United States but just so you know i put a set of the cheaper ones in from cadillacbushings.com and they have worked fine for the last six months

Call 810-441-7215 or visit us at :

http://www.lsapllc.com

We Support our Customers on installation of Bushing replacements for your Cadillac

This video should make the replacement process very simple for you. It is the same for any Deville from 1994 to 1999. I believe it also applies to some Seville and Eldorados, but i am not sure about exactly which years.

Best price I have seen on rear bushings is dormanproducts.com. I have a 1995 cadillac deville and upper and lower are $33.90 each side. An individual can not purchase directly from Dorman, bur you can go to their site and speaqk with live specialist to get your part number and where it can be purchased. I purchased mine thru Dorman via Amazon.com. 1995 Deville part # is 905-504. I am sure you will find this helpful. God Bless

Mike the owner of cadillacbushings.com has new site trying to ride on Last Shot Auto Parts, LLC reputation and name, and SLAP DOWN their product too with:

www.lastshotautopart.com


WHAT DOES THAT TELL YOU about WWW.CADILLACBUSHINGS.COM?




Polyurethane parts SQUEAK and SO DOES THE DISHONEST UNETHICAL OWNER!


Then check out real bushings at WWW.LSAPLLC.COM the REAL Last Shot Auto Parts LLC website !!

The best solution is the product offered by Walton Manufacturing (www.waltonmfg.com). This is a Canadian company that has designed a product specifically for this application. Last Shot offers parts that are meant for other applications and have been turned down to fit the Cadillac knuckles. They offer brass washers to make the length correct but brass will cause rapid corrosion the the control arms. If you are interested in what is involved in replacing the bushings, there is a complete set of instructions on the Walton Manufacturing web page.