Question about 1995 Cadillac DeVille
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
The heater in your car depends upon a flow of hot coolant going through the heater core in order to get hot air into the car. If the heater core is partially plugged, it will restrict the flow. If you have a head gasket that is putting exhaust into the cooling system, it will eventually get into the heater core. When this happens there is no coolant in the heater core to make the air warm. If the water pump vanes have corroded away the result will be very poor coolant circulation causing the heater to not blow hot air. If your car is equipped with a heater control valve that is not functioning properly, the coolant flow will be restricted. One or a combination of these factors is likely the culprit in your case.
Thank you for using FixYa! A FiXyA rating is appreciated!!
Posted on Jan 22, 2009
well, oil seals get old and an engine is still considered to be good, according to what I have read on the Internet, if it consumes less than 1 quart per 1000 miles.And, one should change the oil every 3,000 mi. according to most reputable oil change garages.
Granted if it's leaking any oil, that is not ideal.
Rubber seals and gaskets can get oil soaked and spongy or tightness of bolts that hold gaskets on can be too loose (but I wouldn't overtighten bolts as they only go in so far)..
Posted on Jul 02, 2010
Tips for a great answer:
Aug 02, 2016 | 1995 Cadillac DeVille
Jan 25, 2016 | Cadillac Cars & Trucks
Dec 17, 2012 | 1995 Cadillac DeVille
Jun 28, 2011 | 1995 Cadillac DeVille
Apr 07, 2011 | 1987 Cadillac DeVille
Jan 27, 2011 | 1995 Cadillac DeVille
Nov 11, 2009 | 1995 Cadillac DeVille
138 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: