No ignition when starting there hs no ignating and fule pump not runing

SOURCE: dodge durango

Check to see if you are getting fuel pressure. If you can not hear the fuel pump run with the key in the on position then it is bad. If you are getting the right fuel pressure then you should check the spark

SOURCE: the ignation works in my car but the car is not starting like no fule is reaching the engin is it a problem with the fule

you may want to have the ECU checked, it may have codes that are causing it to lock up, try taking the negative terminal off the battery let it sit for about 10 min. then put it back on and start it, if it still gives you the same problem, you might just have to cycle the engine to relearn a few times. but normally this will reset it