Hi, nice car i loved that model tough on gas tough, heavy body! Now the front wheel. i would jack it up and spin it by hand and listen real good, you can also put a solid bar on parts of the hub and also around that area and put the bar near your ear. If its bad it will sound off like you wouldnt beleive. Do both sides of car so you can hear the difference. First just spin it before going to a bar, just might hear it like that. Ask somone to spin it for you if you need to use the bar. Dont forget to put a horse under the car so the car doesnt fall from the jack on you. Alot of people die every year because of no horse. Let me know ! Frank
SOURCE: Vibration in passenger side
have you changed the shock or strut sometimes that can make it viberate or have you checked the engine mounts on that side?
SOURCE: ABS and Traction system turn off while driving
Hi did you run the wire corectly for the sensor in the hub? it sounds like the wire is being pulled when you turn or brake and its loosing contact with the sensor.Or the plug mite be loose hope this helps
SOURCE: My ABS, traction control, and
Hi, the wheel speed sensor and tone ring are built into the bearing/hub assembly. Make sure the new hub contains an ABS wheel sensor and the cable was properly connected. If it is properly connected, the new hub may be defective.
SOURCE: front passenger brake is pulsing
The ABS sensor, or wheel speed sensor is part of the hub wheel bearing assembly. If the bearing or ABS sensor fails, the entire hub assembly must be replaced. You can get further details about wheel hub assembly from http://www.carpartswarehouse.com/part/wheel-hub-bearing.html
104 views
Usually answered in minutes!
×