Need to know what the purple wire on the factory harness runs to? I only have one yellow wire and one brown. And i have two blacks and two grays. No pink ires on my harness. Car Radio Accessory Switched 12v+ Wire: Yellow Car Radio Ground Wire: Black Car Radio Illumination Wire: Gray Car Stereo Dimmer Wire: Brown Car Stereo Antenna Trigger Wire: Pink Car Stereo Amp Trigger Wire: Pink Car Stereo Amplifier Location: N/A Car Audio Front Speakers Size: N/A Car Audio Front Speakers Location: N/A Left Front Speaker Positive Wire (+): Tan Left Front Speaker Negative Wire (-): Gray Right Front Speaker Positive Wire (+): Light Green Right Front Speaker Negative Wire (-): Dark Green Car Audio Rear Speakers Size: N/A Car Audio Rear Speakers Location: N/A Left Rear Speaker Positive Wire (+): Brown Left Rear Speaker Negative Wire (-): Yellow Right Rear Speaker Positive Wire (+): Dark Blue Right Rear Speaker Negative Wire (-): Light Blue
SOURCE: Speaker replacement
They still follow the GM standard:
LF+ tan
LF- gray
RF+ light green
RF- dark green
LR+ brown
LR- yellow
RR+ dark blue
RR- light blue
Note that if you're looking for them behind the radio, some of the same colors may be used on other wires. The speaker wires should be placed side-by-side for each speaker.
Also, if you're replacing the factory radio, I highly recommend buying a wire harness adapter instead of cutting off the factory plug.
SOURCE: car stereo
its pretty simple, the remote wire is used to tell the amplifier that the cd player has came on. once the cd player has came on, the amp then comes on. simply take a light tester that has a sharp tip, turn the ignition until the cd player comes on, and start testing all of the wires. when you hit a wire in which the light tester says there is power flowing through it, turn the cd player off. if the light goes off with the cd player, you have found a wire that is suitable for a remote wire. dont know how to use a light tester? http://www.bcae1.com/testlite.htm
SOURCE: i'm trying to install a
a radio install kit will have a diagram with it, plus the connectors you get with the kit should have writing on the wires to tell you what they are, the radio wires will have the same writing
786 views
Usually answered in minutes!
×