How to change an alternator in 1983 honda accord

BUY THE SERVICE MANUAL
AND READ TOO ALL SAFETY STEPS

Are you replacing them with new OEM or making them up yourself?

I had this problem about 10 years ago on my 1983 Honda Accord so I traced the wiring and found the problem to be with the cable connector that is near the battery. I removed the battery and traced the cable from the alternator to the connector that is located near the bottom of the battery. I unplugged it and checked to see if all the pins were making good contact. Two of them (the main wires from the alternator output) were deteriorated to the point they actually melted part of the plastic plug. Since I wasn't working on a new car, I simply cut the wires from the connectors, stripped about 1/2 inch of the insulation and installed a large wire nut that made a very tight connection when I tightened the wire nut with pliers. I still drive the car every day and haven't had any more trouble with that issue. It would be a good idea to check all the wires in this connector since one of the smaller ones could be broken at the connector itself.

step by step instruction pretty much only in a repair manual. but the alignment for the marks can be printed out for you by most auto parts stores

you can check at youtube some guys a video posted on how to change a transmission fluid and filter and will guide you step by step

Sounds like you regulator points are staying closed, thus causing the no-charge condition as well as the severe drain on your battery. Check the fusable links, the ES1 and ES2 motors were famous for this in 82-85, but if they are fine, replace your alternator.

Kevin

If it won't post the diagram....email me at [email protected]

Let an expert handle it for you.

amazon.com they will have a manual

Help to find a manual on 1983 honda accord, for engine major repairs.