1997 Mercury Mountaineer Logo
Ger Shoe
Ger Shoe Posted on May 13, 2012
Answered

1997 mountaineer 5 liter motor ,how to replace egr valve, find location

Answer This Question

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.
New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Dec 20, 2012
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.
New Friend:

An expert that has 1 follower.

Joined: Dec 20, 2012
Answers
1
Questions
0
Helped
641
Points
1

I have the 97 built in 96' (non DFTE) and the EGR valves is just to the left of the Transmission dipstick.
1997 mountaineer 5 liter motor ,how to replace egr - 12_20_2012_2_10_04_am.jpg

2 Related Answers

fordexpert

  • 5692 Answers
  • Posted on Sep 24, 2009

SOURCE: egr problem

Check the passages under the airhorn. When carbon builds up the diagnostic blames the EGR for not opening and throws a code. Actually there is no flow to the EGR because the port is clogged and the diagnostic measures the flow after the EGR.

They really needed to have a sensor before and after the EGR. Also remember to disconnect the battery for 10 minutes to remove old info.

Ad

Anonymous

  • 2 Answers
  • Posted on Jul 09, 2009

SOURCE: where is the egr valve located on a 1997 mercury

follow the air filter vent up to the throttle body then look in back of aluminum housing

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2000 Dodge Dakota. Where is the EGR valve location please?
Question edited for clarity.
Question moved to model category.

3.9L EGR valve location

 Dakota Durango Forum https://www.dakota-durango.com > threads > 3-9l-egr-...
OBD-II trucks (96 and up) didn't have EGR any longer. If it did it would have a tube coming off the passenger side exhaust manafold and running to the EGR valve ...

2000 dodge dakota egr valve location

 Fixya https://www.fixya.com > ... > Cars & Trucks > Dodge
4 hours ago - On a 2005 Dakota with 4.7 liter engine (non-HO), the EGR valve is located near the intake manifold on the driver's side right up against the ...

SOLVED: Where is egr valve on 2000 dodge durango - Fixya
Oct 26, 2008
Where is the EGR valve located on a dodge durango - Fixya
Feb 5, 2009
How to reach the EGR valve on a 2000 dodge durango - Fixya
Oct 15, 2015
Where is the location of the egr valve on the 4.7 liter engine
Nov 17, 2019
More results from www.fixya.com
Read full answer
Nov 14, 2023 • 2000 Dodge Dakota Quad Cab
0helpful
1answer

What is the electrical connector that sits on top of my egr valve on my 1997 Mercury Mountaineer
It's for the egr sensor. It lets the economy know what position the egr is at. This part is available separately from the egr itself
Read full answer
Apr 24, 2019 • Mercury Cars & Trucks
1helpful
1answer

I need to know if my 2003 ford ranger 3.0 liter engine has a egr valve and where is it located
yes you have egr valve
its on the passenger side of the motor back at the fire wall
you can also locate it by looking at you exhaust
 you will see a tube that goes from the exhaust up the fire wall and into the egr hope this helps
give feed back
Read full answer
Dec 28, 2010 • 2003 Ford Ranger Regular Cab
2helpful
3answers

Need to find out where my egr valve is located on my 2003 impala
see pics below. Please let me know if you have more questions.

3.4Liter engine:

4754371.gif

3.8 Liter engine (#1 below):

460df7a.gif
part look like this:

5a8d5ae.jpg
Read full answer
Oct 30, 2010 • 2003 Chevrolet Impala
0helpful
1answer

1997 CAVLIAR 2.2 LITER OB11 READS ( EGR FLOW
Either the EGR solenoid is at fault or the EGR valve is
Read full answer
Apr 21, 2010 • 1998 Chevrolet Cavalier
0helpful
1answer

Where is the egr valve located on a 1997 dodge caravan 3.3 liter engine
most of the time it located close to the intake manifold or throttle body..its a round part with a vacuum hose connected to it
Read full answer
Feb 26, 2010 • 1997 Dodge Caravan
1helpful
2answers

Egr problem , 1997 mercury mountaineer 5 liter. egr system not a dpfe system, no egr tube, ports into the intake elbow. replaced egr valve egr postion sensor, checked the egr selonoid for resitance showed...
Check the passages under the airhorn. When carbon builds up the diagnostic blames the EGR for not opening and throws a code. Actually there is no flow to the EGR because the port is clogged and the diagnostic measures the flow after the EGR.

They really needed to have a sensor before and after the EGR. Also remember to disconnect the battery for 10 minutes to remove old info.
Read full answer
Sep 24, 2009 • 1997 Mercury Mountaineer
0helpful
1answer

Where is the egr valve located on a 1997 mercury mountaineer.
follow the air filter vent up to the throttle body then look in back of aluminum housing
Read full answer
Jun 23, 2009 • 1997 Mercury Mountaineer
0helpful
1answer

I have a 1991 Olds custom cruser that pingsthe motor ping
Either your valves are knocking. Your IAC (Idle Air Control valve), or your knock sensor. The only thing is that if your knock sensor is bad it would throw a code. Your caddy could be the problem but again it would throw a code
Read full answer
Apr 18, 2009 • Oldsmobile Custom Cruiser Cars & Trucks
5helpful
2answers

2005 Dodge 1500 code p0404 EGR valve.
The electronic EGR valve and solenoid assembly is attached to the rear of the left cylinder head ,

  1. Remove electrical connector (5) at top of EGR valve solenoid.
  2. Remove tube mounting bolt (1) at intake manifold.
  1. Remove two bolts (4) connecting EGR tube (1) to valve assembly.
  2. Remove gasket located between EGR tube flange and EGR valve assembly.
  3. Remove two EGR valve mounting bolts (5).
  4. Separate valve assembly (3) from engine.
  5. Remove and discard metal gasket located between cylinder head and valve assembly.
INSTALLATION
  1. Clean area at rear of left cylinder head where it joins base of EGR valve.
  2. Clean EGR tube where it joins EGR valve.
  3. Position new gasket between EGR valve and cylinder head.
  4. Position EGR valve to cylinder head. Install and tighten two bolts (5). Refer to Torque Specifications.
  5. Position new gasket between EGR tube flange and EGR valve assembly.
  6. Position EGR tube (1) to side of EGR valve and into intake manifold.
    1. Install EGR tube flange bolt (1) at intake manifold. Tighten bolt. Refer to Torque Specifications.
    2. Connect electrical connector (5) to top of EGR valve solenoid (2).Do a final tightening of two EGR tube bolts (4). Refer to Torque Specifications
Read full answer
Feb 05, 2009 • 2005 Dodge Ram 1500
Not finding what you are looking for?

View Most Popular

1997 Mountaineer

  • Cars & Trucks

Related Question

2000 Dodge Dakota. Where is the EGR valve location please?

  • 2000 Dodge Dakota Quad Cab

Related Topics

651 views

Ask a Question

Usually answered in minutes!

Popular Questions

Can i find my original key less door entry code using my VIN numb

1998 Mercury Mountaineer

Replacing my mercury mountaineer starter

2003 Mercury Mountaineer

Engine Failsafe Mode came on after cleaning battery cables. Vehicle will start, but won't run. No throttle

2005 Mercury Mountaineer

NO manual for a 97 mercury mountaineer

1997 Mercury Mountaineer

2003 FORD EXPEDITION PCV VALVE LOCATION

Mercury Mountaineer Cars & Trucks

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Mercury Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...