Range rover power seat and steering column froze

SOURCE: 1991 range rover passenger seat doesn't move

You could try swapping out the seat switch from the other side if you are just trying to move the **** portion forward or backward. What usually goes wrong is the seat switch gets corroded and needs to be disassembled and rebuilt. The opposite seat switch will no fit the other side and mount but you can finesse it around to a position where you can make connectioin.

To remove seat switches - Use a small screw driver to carefully pry up the button control knobs (**** and back knobs) on top of the switch housing. Next, remove the cover plate and there you will have 2 screws exposed to remove the switch.

SOURCE: range rover l322 power steering not working

check the power steering oil and try to check the cable too


rate this

SOURCE: Normally, when u place ur key in the ignition,

try jiggling the steering wheel til it clicks or moves and then try moving the key

SOURCE: replace steering column lock & ignition land

use a dot punch and hammer and try, by hitting the sheared head part of the bolt, to turn it anti clockwise, once it starts to move, it should come out very easy,

SOURCE: range rover l322 2002 heavy power steering renewed

The Solenoid fitted on the Steering Rack is not getting the command from The Body Control Unit. Kindly Replace your BCM and then your problem is solved. You can try to make sure by giving direct current of 12v to the solenoid and check the Steering. if it works then simply change the BCM as it's not giving d command to the Solenoid. Salman EiD