SOURCE: remove the rear bumper
Removing Prowler Rear Bumpers First remove the four 10 MM bolts holding the trans cooler and drop it down. Support it by attaching one bolt to the lower hole on the cooler frame. This will keep the weight off the lines. This takes two min. and allows easy removal of the elect. lines. Then remove the four bolts on each bumper. The bolts are 13MM and 17MM. You will need a ratchet, sockets, extension and a 13MM open end wrench. If you remove the rear bumpers, you should replace the rear pan with one of the aftermarket ones otherwise you will have big holes staring at the people behind you. Go to prowleronline.com and check the vendors for a couple of options. Maybe you are removeing them to paint and reinstall. Look at this link for some options .. Mine is the 7th post down. http://www.prowleronline.com/ubb/Forum1/HTML/014949.html Hope this helps.
SOURCE: Remove rear plastic bumper cover
please email me at [email protected] with any other info or questions if you have already gone to a body shop
SOURCE: Toyota Echo 2004 Hatchback Replace Rear Bumper
There is a screw on each side of the bumper cover at the wheel wells. It should be a 10mm. You might have to move the 1/4 liner over a bit to fond them. After those bolts are removed, you can pull the sides of the cover away from the quarter.
SOURCE: I do not have a key to remove my spare tire. There
if its an aftermarket lock drill out lock and remove if it came as a dealer option check glove box or jack area for spare key
SOURCE: Volkswagen Passat rear bumper removal
all the screws/bolts are underneath the plastic cover.hex head.(allen key)
598 views
Usually answered in minutes!
×