If it happened after pad replacement check the pad wear sensors
SOURCE: VW Polo Brake Sensor Light on but Brakes are fine!!
change the brake sensors on the front pads i had the same problem
SOURCE: Engine warning light and engine vibration 2002 VW Passat
The flashing is telling you that the engine is mis-firing, the dealer will run a test to determine the cylinder that is mis-firing, chances are it is something simple
SOURCE: 2002 Jetta Brakes
On one of the front driver side pads there is a sensor for low pads. He either did not hook it back up or got a lose connection to it.
SOURCE: ABS/BRAKE warning lights always on in 2000 VW Passat
OKEY TRY TO GET A CODE WITH SCAN TOOL AND IF YOU CANNOT CONTACT WITH YOUR ECM YOU HAVE TO GET FIX YOUR ABS CONTROL UNIT.
BOSH ABS MODULE GIVES PROBLEM ON THAT MODELS I HAVE SAME PROBLEM WITH MY 1999 PASSAT V6 I SENDED MY PART TO GET FIX AND WAITING FOR THE COME BACK.
GOOD LUCK.
I DRAIN THE BRAKE FLUID FOR THE FIX LEAK FROM MY CALIPER AND I REMOVE THE ABS UNIT AND TAKE THE ELECTRONIC MODULE OUT AND SEND THE FOR THE REPAIR.
1,108 views
Usually answered in minutes!
×