Iat sensor honda prelude 1996

Hi Emilio-
I found this link.
https://www.autozone.com/repairguides/Honda-Accord-Prelude-1996-2000/ELECTRONIC-ENGINE-CONTROLS/Crankshaft-Position-Sensor/_/P-0900c1528003a201
You can put in your engine specs.

Hope this helps.

Air/idle control sensor

Take it to Honda.

yes as long as the overall hight is the same.

hope this is what you were looking for. let me know if you need more!

http://www.wiringdiagrams21.com/2008/08/07/honda-prelude-iv-92-96-electrical-wiring-diagram

the light will only turn off when the ABS system fault that caused the module to turn the light on is repaired, to do this u need to have the dealer test the system for fault codes, most likely one of the four wheel speed sensors will be defective.

6
Accord Civic CRV CRX Del Sol Odyssey Prelude
85-98 86-98 97-98 85-91 93-97 95-98 85-98 ECT Sensor (Engine Coolant Temperature)
defective circuit or unplugged / defective sensor
10
Accord Civic CRV CRX Del Sol Odyssey Prelude
85-98 86-98 97-98 85-91 93-97 95-98 85-98 IAT Sensor (Intake Air Temperature)
defective circuit or unplugged / defective sensor
16
Accord Civic CRV CRX Del Sol Odyssey Prelude
90-95 88-95 n/a 88-91 93-95 95 88-95 Fuel Injector System
defective circuit or unplugged / defective fuel injector

check your wiring for dirty connections or broken wires, you may have wires that are rubbed through or connectors that are not making full contact. you will need an ohm meter and check wires for continuity. a wiring diagram will be needed.

Intake valve clearance 0.15mm-0.19mm (6-7 thou); Exhaust clearance 0.17mm-0.21mm (7-8 thou). All measurments COLD engine. 2.2 VTEC Prelude engine 1992-1996, import and UK.

it is on the intake manifold...should have a small plug on it with 1 or 2 wires