The cause of this condition may be an increased air gap between the wheel speed sensor and the hub reluctor ring due to rust and debris built up on the sensor mounting surface. The wheel speed sensor will need to be removed and the rust around the hole needs to be removed with a file or wire brush, and then apply some grease to the sensor and reistall.
The first most likely possibility is a wheel speed sensor, probably in one of the front wheels. if so, the sensor could be sold separately or poss. as a complete wheel bearing assy. the first thing a shop would do is scan the a.b.s. module for any codes which will bring up which wheel was trouble.
676 views
Usually answered in minutes!
×