2002 dodge stratus blower motor

Could be fuse. switch, resistor pack, or motor.

this is an indication that the blower motor resistor is bad and needs to be replaced. the system is designed to always work on high if the resistors go bad.

Possibly bad resistor on blower speed control, replace it with higher wattage resistor of the same value. If you continue to hit the dash, you will damage the control and it will be more expensive than the resistor. Amclaussen.

You need a repair shop

Its more than likely the blend door motor, common on Chrysler vehicles.

The blower motor itself or the blower motor resistordo the resistor its faulty

Sounds like maybe they caused a short in the blower motor for the fan when they replaced condenser.

Replace the Blower Motor Resistor.It will be located in or near Blower motor box.

100%: This is the Blower Motor Resistor that needs to be replaced. It is located adjacent the Blower Motor. You will have to take the Dash Glove Box off to gain access.

The area where you "hit" to make the unit go is your neighborhood for investigation.

Something is loose or not making a good connection.

If you discover that there are no loosenesses, sometimes a blower motor can get a dead spot, but typically, once going, the motor would not stop, with that condition.