Please help me with diagram which shows the s40 b4204t head whith the cams timed with hand made angle iron tool

SOURCE: 2001 Volvo s40 oil leaking in turbo, smokes white

Water in combustion chamber makes white smoke--suspect that the head gasket is leaking water into the chamber. If oil leaking around turbo, it may have a bad bearing and bad oil seal. Check waste gate valve and control.

SOURCE: head bolt torque specs and timing marcs for a 94 volvo 960 6cyl

you do 14 foot pounds then 45 foot pounds then a 120 degree turn.if aluminum heads are what you have

SOURCE: I need to know how to set camshaft timing on v70 with cvvt

Buy repair manual at auto parts store. They can order any manual you need.

Peter

• 77 Answers
• Posted on Jul 27, 2009

SOURCE: Timing marks set to get car back in timing so it can start

take out number one sparkplug, take the cam cover off. turn the engine of with a spanner on the bottom pulley. make sure number one piston is at TDC, now check to see if the inlet&outlet valves are close. and the piston is all the way at the top, do this with a long screwdriver to make sure it is.
if everything ok, then it will be a ignition problem.

SOURCE: I need cam timing settings

The timing marks on the cam gears align with the timing marks in the rear timing cover. The timing mark on the crank gear aligns with the timing mark on the oil pump assembly.
The tensioner is set by rotating the tensioner clockwise until the holes in the tabs on the left side of the tensioner are aligned, then tighten the center bolt.