Code p0011 with check engine light on - 2006 Pontiac Montana

https://www.google.com/search?q=Nissan+P0011


P0011 Nissan See the error code p0011. it indicates the engine control module has determined that the bank 1 intake camshaft is more advanced than what the engine control module has commanded it to be. Jul 23, 2021

How to Fix NISSAN P0011 Engine Code in 4 Minutes [1 DIY ...

What the P0011 code means. P0011 is the OBD-II generic code indicating the engine control module (ECM) has determined that the bank 1 intake camshaft is more advanced than what the ECM has commanded it be. This over-advanced condition could be during advancing or retarding of the camshaft timing.

The timing belt or chain may have jumped and the noise could come from valves hitting the piston head.

This code is generic and does not specify a specific failure. This code could represent low oil level, overdue oil change, restricted or damaged VVT solenoid. Emissions can be affected by a damaged PCV valve, ignition component or a vacuum leak. Would you tell me what you have checked or found so far? How is the engine running (smooth or rough)? Does the Engine Light only turn on solid or does it flash? Let me know how things are going or if there is anything else I can do. Good luck.

You can read all about your code here:
http://www.obd-codes.com/p0011

Most likely a P0011 DTC will result in one of the following: hard starting, poor idle, and/or stalling. There are potentially other symptoms as well. Of course, when trouble codes are set, the MIL (malfunction indicator lamp, a.k.a. the check engine light) illuminates.

P0011 Volkswagen - 'A' Camshaft Position Timing Over-Advanced Or System Performance Bank 1 ' Add Comment
Possible causes
- Dirty engine oil
- Low engine oil level
- Camshaft actuator circuit open or shorted
- Camshaft actuator circuit poor electrical connection
- Faulty camshaft actuator

Timing is to far advanced causing vehicle to run hotter than normal you'll need to take it to a dealer it can be a few items causing this ecu unit faulty sensors or oil valve hope this helps

http://www.datsc.com/tabid/122/OBD-Error-Code/P0011/Diagnostics/Mercedes-Benz/Default.aspx
"..........OBD Code P0011refers to
A code P0011 refers to the VVT (variable valve timing) or VCT (variable camshaft timing) components and the car's PCM (powertrain control module, also called an ECM). That consists of a few different components but the P0011 DTC specifically refers to the camshaft (cam) timing. In this case, if the cam timing is above a set limit (over-advanced), the engine light will be illluminated and the code will be set. The "A" camshaft is either the intake, left, or front camshaft.

SymptomsPossible sumptoms of OBD code P0011
Most likely a P0011 DTC will result in one of the following: hard starting, poor idle, and/or stalling. There are potentially other symptoms as well. Of course, when trouble codes are set, the MIL (malfunction indicator lamp, a.k.a. the check engine light) illuminates.

CausesPossible causes of OBD code P0011
A P0011 DTC trouble code may be caused by one or more of the following: Incorrect camshaft timing Wiring problems (harness/wiring) in intake timing control valve control solenoid system Continuous oil flow to VCT piston chamber Failed timing valve control solenoid (stuck open)

Possible SolutionsThis DTC code is a result of a mechanical fault of the VCT unit or related components, so there is no need for electrical diagnosis. Refer to vehicle specific repair manual to perform component tests for the VCT unit. Notes: Dealer techs have advanced tools and the ability to follow detailed troubleshooting steps, including the ability to test components using a scan tool.

Related CodesP0010 P0012 P0020 P0021 P0022..........."

The P0011 means "A" Camshaft Position - Timing Over-Advanced or System Performance.
__________________
mini vci for tis

Have you had a timeing belt done? The code refers to the VVT (Variable Valve Timeing) or VCT (Variable Cam Timeing) Same thing. It may need a cam sensor replaced or a problem with the VVT control solinoid This can happen if the VVT solinoid has been unbolted for some reason. The computer of the car may just need to be re set if your lucky

Your camshaft on the intake side is over advanced.