Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on Apr 25, 2012

1996 7.4 liter 3500 serpentine belt diagram - 1996 Chevrolet C/K 3500

5 Related Answers

Anonymous

  • 291 Answers
  • Posted on Jun 11, 2008

SOURCE: diagram for a serpentine belt

28fb7fa.gif
Good luck!!!
Eitan

Ad
emissionwiz

Marvin

  • 85242 Answers
  • Posted on Sep 04, 2008

SOURCE: Serpentine Belt Diagram for Chevy Cavalier 1996 2.2L SFI OHV

3d12d62.jpgBelt

Anonymous

  • 3533 Answers
  • Posted on Apr 13, 2009

SOURCE: belt replacement

what i do is draw me a diagram before i take the old belt off you can also ask the auto part store where you get the new belt and for the most part they have a diagram for a long time came on the box with the new belt in it.

Anonymous

  • 299 Answers
  • Posted on Jun 16, 2009

SOURCE: we need a diagram to replece the serpentine belt

easiest solution,go to local car lot find same year and model,open hood copy diagram,or wrecking yard if old enough,or local parts house may have diagram in manual.

Anonymous

  • 1 Answer
  • Posted on Nov 14, 2009

SOURCE: i need a serpentine belt assembly guide or diagram for a 2006 3.5 liter v6 chevrolet impala

Diagram 9-5 on this page:
http://www.daycoproducts.com/daycoweb.nsf/Serp%20Rout%20Guide%20Illus.pdf

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Serpentine belt diagram for a 2003 Chevy unpalatable 4.3

Pop the hood of the car and locate the serpentine belt routing diagram. The diagram on the 2003 Chevrolet Impala is on top of the fan shroud. The diagram will be a picture of all of the accessory pulleys and how the serpentine belt is routed among the pulleys. This diagram will give you the exact direction for routing the new belt onto the pulleys. If you cannot find a serpentine belt routing diagram, take a notepad and pen and draw out the exact routing diagram of the old belt across the pulleys.

  • 2 Locate the serpentine belt tensioner. It is located below the alternator on the left front side of the engine. The tensioner on the 3.4 liter, 3.5 liter and the 3.9 liter engines will require a 3/8 ratchet to release the belt tensioner. The 3.8 liter engine will require a ratchet and a 15 mm socket for the belt tensioner. Rotate the belt tensioner clockwise to loosen and remove the belt from the belt tensioner pulley.
  • 3 Slide the old belt from the belt tensioner pulley. Remove the belt from the remaining pulleys and pull the belt from the engine compartment.
  • 4 Route the new belt across the crankshaft pulley first. The crankshaft pulley is the big pulley on the bottom of the engine in the center. Then route the serpentine belt across the remaining pulleys as directed by the serpentine belt routing diagram. Leave the belt tensioner pulley for last.
  • 5 Rotate the belt tensioner clockwise again to relieve the tension and slide the new belt across the top of the belt tensioner pulley. Release the belt tensioner and the belt will tighten up as the tensioner applies pressure to the belt. Make sure the new belt is properly seated in all the pulleys.
  • 6 Crank the engine and inspect the belt again to make sure that it stays seated in the pulleys.

  • Read more: How to Replace a Serpentine Belt on a 2003 Chevrolet Impala ' eHow.co.uk http://www.ehow.co.uk/how_6120665_replace-belt-2003-chevrolet-impala.html#ixzz1Yi6QLAjb
    11helpful
    1answer

    I need the belt diagram for a 2005 dodge 3500 diesel 4X4

    Check this diagrams (click for zoom)...

    c73c3a8.jpg

    Fig. Accessory serpentine belt routing-2004-05 5.9L Diesel engines with A/C



    a8e8692.jpg

    Fig. Accessory serpentine belt routing-2004-05 5.9L Diesel engines without A/C

    Hope helps (remember rated this).
    0helpful
    1answer
    2helpful
    1answer

    Need a diagram for serpentine belt for a 1997 ford 4.6 liter v8

    here is an image of the engine in question (on the right) it is not a diagram but shows the track of the serpentine belt

    http://static.howstuffworks.com/gif/1999-2000-2001-2002-2003-2004-ford-mustang-5.jpg


    1helpful
    1answer

    Serpentine belt diagram 2007 dodge 5.9 3500

    get the belt routing from the local dealer.
    they will not charge alot of money for a reprint from the factory service manual.
    also
    dayco belts come with the belt routing on the box.
    2helpful
    3answers
    Not finding what you are looking for?

    220 views

    Ask a Question

    Usually answered in minutes!

    Top Chevrolet Experts

    ZJ Limited
    ZJ Limited

    Level 3 Expert

    17989 Answers

    john h

    Level 3 Expert

    29494 Answers

    Thomas Perkins
    Thomas Perkins

    Level 3 Expert

    15088 Answers

    Are you a Chevrolet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...