Heatbolt torque settings for audi 2.8 v6 30 valve quattro 1998 sedan

fixya doesnt cut/program keys --contact a dealer[nearest one ] and ask those questions or search for an authorized locksmith online

You make it sound like it's our fault you can't find it :>D

The start of production of the Audi A4 B5 is 1994. With minor changes, it was produced until 2001. At first, only the sedan version was available, the station wagon (Avant) appeared a year later. This material provides information on relay circuits and fuses Audi A4 b5 1994, 1995, 1996, 1997, 1998, 1999, 2000, with an assignment of their elements and locations.

Can't get much clearer than this. Relay 4 is one plus 'Additional Relays 23 and 24. Plus fuse 23 and 24.

Fuse box diagram Audi A4 B5 and relay with assignment ...

https://fuseandrelay.com > audi > a4-b5

This material provides information on relay circuits and fuses Audi A4 b5 1994, 1995, 1996, 1997, 1998, 1999, 2000, with an assignment of their elements and ...
‎Passenger compartment · ‎Main fuse box · ‎Relay box · ‎Engine compartment

it is possible that the chain has broken but as to needing to replace the engine is a bit extreme
it is not listed as an intereference engine which means that the valves should / maynot be damaged
the crank shaft cog is not keyed to the crankshaft so if the pulley/ harmonic balancer was not to specified torque setting , the cog would spin on the shaft indicating a broken chain
there is a second chain that drives 2 balance shafts
the book has the same set up for a3 quattro 2.0l 2009-2012, A4 quattro 2.0 L 2009-2012 A5 quattro 2.0L 2010-2012, Q5 2.0 L 2011--2012 TT turbo 2.0L 2011-2012
engine identifications covered are CBFA--CCTA--CAEB--CETA
I would seek a second opinion from an accredited specialist shop that handles your make of vehicle as what you have been told seems a bit extreme
get quotes
remember ,talk is cheap but to replace an engine when not necessary can be expensive

The brown wire from the downstream sensors is broken or otherwise not connected to the computer. Check for damage to the wire.

Timing belt routing diagram for 1995 Audi A6 Quattro Sedan (4A2) V6-2.8L (AAH)

I can not insert the picture here because bad page. Send me your e-mail address, and I will send you back the picture.

ALL 1999 Audi A6:
A6 Quattro Sedan
A6 Quattro Wagon
A6 Sedan
have the 2.8L DOHC V6

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Quattro Sedan, Quattro Wagon, Sedan, Wagon, which one, need email address to send to

clear finger nail polish works great

Any comparable car should work. Your car is a 98, so you would have to stick with Audi/VW cars that have the 30v V6 (98-01.5). The 97 and earlier years used an older 12v V6 and those aren't compatible. It's unlikely that the 1.8T models would work either. You'd have to look for A4, A6, and Passat cars in the model range I mentioned, and you may find that if you have a quattro model, your replacement would have to come from a quattro (Audi) or 4motion (VW) car as well. Try to find a donor car with your same drivetrain (30v V6, auto/stick - whichever you have, and 2wd/4wd, whichever you have).

To tell at a glance which engine is which, the 30v has black covers on the valve covers that say "5V" (for five valves per cylinder). The older 12v cars I believe actually say "12v" on them.

is it fitted correctly? If it is not fitted correctly it will do this. Have you checked the relay?