Question about 2000 Land Rover Discovery
Front and rear ac/heater fans do not kick on,have changed diode in heater box,fan control unit and relays,have verifyed both fans work,and heater control unit powers up and display says its on but no fan is on. when i cut it on i loose the voltage at the F7 fuse.... and ideas/ direction?
There is a resistor pack that controls the fan speed switches. Not sure about the 2000 Disco but on Range rovers of that era it is under the cover below the decker panel.- namely at the rear of the bonnet. Check that it actually is there, then get back to me and I'll post details of how to replace it
Posted on Jan 25, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
My brother in law and I changed it without taking anything apart except the fan cover, what you'll need to do is gently use a crobar to release the tensioner pully directly below the alternator, and jam it a bit, then slowly release the old belt, if it's as worn as mine was you'll be fine. Then simply run the new belt starting from the bottom up. There's a great diagram on the weblink below.
Posted on Feb 15, 2009
there is a module mounted on the fan shroud that is a common problem. but as always, check fuses, connectors and grounds!
Posted on Feb 17, 2010
Tips for a great answer:
Dec 05, 2017 | Land Rover Cars & Trucks
Oct 11, 2016 | 2000 Land Rover Range Rover
Sep 29, 2016 | Land Rover Cars & Trucks
Sep 21, 2014 | 2002 Land Rover Freelander
Jan 06, 2014 | 2000 Ford Explorer
Aug 20, 2012 | 1992 Dodge Spirit
Aug 23, 2011 | Land Rover Discovery Cars & Trucks
Aug 15, 2009 | 1993 Toyota Camry V6
Jul 10, 2009 | 1992 Chevrolet C1500
Jan 08, 2009 | 1998 Land Rover Range Rover
Oct 11, 2016 | 2000 Land Rover Discovery
26 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: