Question about Cars & Trucks

Open Question

I need a replacement bulb for a Kal Equip timing light model L-5

Bulb is burnt out, where can i find a replacement?

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: The socket is burnt. I have replaced the socket

I've done alot of research on this problem and from what I found GM is aware of the problem...it is very common in this model...however there is little that can be done...I myself was replacing sockets about every two weeks that had melted. I tried dielectric grease, different bulbs, and even modifying the high beam type socket so it would fit the low beam bulb hoping it would handle the heat. However nothing worked. Finally I decided to bypass the socket and cut it off and replace it with simple spade connectors on the wire that fit the bulb connections. I then packed the back of the bulb with dielectric grease. Haven't had a problem since...Hope this helps.

Posted on Dec 02, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

1999 Honda Accord Center Console Gear Shift Burnt Out Light Bulb/Lamp...


The part number of the Light Bulb/Lamp replacement is # 74. The part cost me $5 for a Sylvania 2 pack from a local Auto Parts store. A good site with instructions on how to replace the burnt out bulb is http://automotive.trevorated.com/
This part number may work for most G6 / 6th Generation Honda Accords, though I do know it works for my 1999 Honda Accord 4-speed automatic.

on May 07, 2010 | Honda Accord Cars & Trucks

2 Answers

I have a 2008 Mazda 5 minivan how do I change the headlight bulb


Headlight Change 2006-2010 Mazda 5 - CarCareKiosk

www.carcarekiosk.com/video/2009_Mazda_5_Sport_2.../headlight
This free video shows how to change a burnt out headlight on a 2009 Mazda 5 Sport 2.3L 4 Cyl.. Complete instructions for replacing a head light bulb on a 2009 ...

Low beam head light bulb replace 2000-2006 Mazda Mpv ...

? 5:11
https://www.youtube.com/watch?v=kblzMLRJrok
Jun 29, 2013 - Uploaded by hp11208
Low beam head light bulb replace 2000-2006 Mazda Mpv .... My step dad and I successfully replaced a headlight yesterday! :-) ...I've lost it trying to replace the bulb. if anyone can let me know I would really appriciate it thanks ! ..... 5:00. Cleaning your IAC to fix rough idle on 2000 or 2001 Mazda MPV ...

Nov 29, 2015 | Mazda Cars & Trucks

1 Answer

I just bought a 2003 Ford F150, and a warning chime goes off right after starting. Chimes 5 times, pause, and repeat 4 more times. There are no lights or codes displayed on the dash. It drives fine, but...


The warning chime of 5x5 is a sign that the SRS ( airbag ) light is burnt out, and there is an error with the SRS system.

Verify SRS ( airbag ) lamp operation, turn the key from off to run ( do not start ) the airbag lamp should illuminate. If not, it is burnt out. Need to pull the cluster and replace.
( thread at F150online.com on cluster removal in the how to forum - titled about changing cluster illumination color or installing a cluster overlay ).

Once you replace the SRS bulb, you will get a LFC ( light Flash Code ) of a 2 digit number.
Example :
flash flash flash flash { short pause } flash flash { longer pause } flash repeats the same for 5 times, the solid on.
This is an example of a LFC 4-2. Once you have the LFC start a new problem with the LFC and we can get that fixed after you get the bulb replaced.

Aug 23, 2011 | 2003 Ford F150 Regular Cab

1 Answer

Front parking lamp will not light


First check the bulb, alot of the time if a bulb is burnt out it will show something on the dash, example if a directional bulb is burnt out the dash will show a solid lit directional on the dash. Next check the bulb socket for corrosion, some times you will need to either grease it, bend the tongs up or just replace it. I hope this helps don't be afraid to ask if you need more help!

Feb 12, 2010 | 1989 Jeep Cherokee

1 Answer

Turn lights come on but do not blink


This means that one of the bulbs somewhere is burnt out. Its a fail safe to get the consumer to fix burnt out lights. if you do not have a bad bulb then it is the flasher, this is located in you fuse box. It needs to be replaced. ($5)

Jan 08, 2010 | 1994 GMC Jimmy

1 Answer

The socket is burnt. I have replaced the socket and the light bulb. now the new socket and new bulb is burnt. The bulb is not burnt out it is melted inside. i canwiggle it and it comes on for a short time,...


I've done alot of research on this problem and from what I found GM is aware of the problem...it is very common in this model...however there is little that can be done...I myself was replacing sockets about every two weeks that had melted. I tried dielectric grease, different bulbs, and even modifying the high beam type socket so it would fit the low beam bulb hoping it would handle the heat. However nothing worked. Finally I decided to bypass the socket and cut it off and replace it with simple spade connectors on the wire that fit the bulb connections. I then packed the back of the bulb with dielectric grease. Haven't had a problem since...Hope this helps.

Dec 01, 2009 | 2002 Chevrolet TrailBlazer

1 Answer

Left rear brake light stopped working but bulb and fuses are OK.


These are Dual Function Bulbs. They control the Parking Lights and the Brake Lights. This Bulb is Burnt out on the Brake Coil inside the Bulb. I have actually seen Bulbs that were Bad But you could not Tell by jast looking at them. It should be fine with a New Bulb. Please Rate My Response! Thanks!

Feb 05, 2009 | 1999 Ford Expedition

1 Answer

My stereio light dont work some times it will come on. I have a 2003 pontiac grand prix origanal equip


I had the same problem. There is a bulb inside the stereo itself. That bulb goes bad ~every 5-6 years. It costs ~$20. It is pretty simple to fix yourself. Here is the website where I got the bulb http://www.corvetteradios.com/corvetteradios_013.htm
I would assume you have the same problem.

You can determine it easily. If your radio is on, and you shine a light on the display, and you can see the numbers/text to what you are doing, then your bulb is burnt out.

Jan 03, 2009 | 2002 Pontiac Grand Prix

1 Answer

My light bulb is burnt out...and I dont know how to get to it


It's called a position light, do you have owners manual, it shows how to replace the bulb under lights, but you don't , all you do is, raise hood, depending on which side you are at it, top left/right there are no wires going to the bulb from backside they are built in headlight housing, it will be a flat tab stick out, 1/2" by 1/2", you need a pair of needle nose pliers to grab it, turn counterclockwise, and pull socket out, takes a w5w GE bulb

Sep 11, 2008 | 2007 Kia Rio 5 Sx M/T Hatchback

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

234 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

84540 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

john h

Level 3 Expert

19466 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...