2000 Chevrolet Tahoe Logo

Related Topics:

A
Anonymous Posted on Apr 12, 2012

Reset abs light chevy tahoe - 2000 Chevrolet Tahoe

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Nov 24, 2008

SOURCE: 2001 Chevy Tahoe with ABS & Brake light on.

I hope you have the problem fixed by now, but, it is the ABS control under the truck. You need to go under the hood and open the fuse box and disconnect the 60 amp fuse for the ABS, this will turn it off before it burns up. This however will also cause the traction assist off light to stay lit all the time. To the fix the problem you can pay tons of money ($700 or so) to have the dealership install a ABS control and the problem will happen again over time. Or, remove it yourself, go on ebay and ship it off to a guy who repairs them for about $150 and you will never have the problem again. Also, if you wrap your cable ends with plastic and protect them good, you can still drive you truck while the part is being worked on. It takes about a week.

Ad

Anonymous

  • 16 Answers
  • Posted on Nov 25, 2008

SOURCE: abs wheel sensors on 2004 chevy tahoe

yes they are four wheel abs that means there are four sensors one for each wheel

Molson02536

Harvey N Tawatao

  • 3854 Answers
  • Posted on Jun 06, 2009

SOURCE: is there a huel reset on 2001 chevy tahoe

Sorry there is no fuel pump reset on the Tahoe. If you have no fuel pressure, check the fuses and relay,and wire harness to the fuel pump from the inside frame rail on the drivers side. If you can hear the fuel pump working, check the fuel pressure at the shredder valve and there should be 60 to 66 PSI, if you don't you can try checking for 12 volt at the fuel pump wire harness at the frame rail. Good luck and keep me posted, be glad to help.

alicantecoli

Colin Stickland

  • 22516 Answers
  • Posted on Jun 23, 2010

SOURCE: 2004 chevy tahoe abs light came on and front wheel

look at that wheel as the metal ring thing that makes the ABS work has come loose on the end of the drive shaft,just tack weld it back into position

nicole99wu

Aobd2

  • 1049 Answers
  • Posted on Aug 31, 2011

SOURCE: abs and brake light stays

Well, it could mean that the emergency brake has not been fully released.The ABS system light is on if something has occurred within the ABS system. Something faulty may have happened there, get it checked out!

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Abs and brake light stay on in 2001 chevy tahoe

Seems the most likely is the control module, but could be affected by bad grounds or possibly a wheel speed sensor.
Read this thread, about 3 pages long, and has info and links for the control module fix and where to check the grounds.
http://www.tahoeyukonforum.com/threads/abs-light-and-brake-light-01-tahoe.39226/
0helpful
1answer

Changed bearings and abs light and stabletrack still on do they reset after u replace the bearings and if so how long

Service Traction Control - Stabilitrak and ABS light, Help - Page ...

chevroletforum.com > ... > Tahoe & Suburban
Aug 16, 2012 - Service Traction Control - Service Stabilitrak and ABS light came on. ... Its supposed to still be under warranty, "Major Guard". ... I replaced my rear shocks with OEM re-manufactured Arnott shocks (great company) and in the ...

SilveradoSierra.com • Traction Control, Stabilitrak & ABS Issue

www.silveradosierra.com/.../traction-control-stabilitrak-abs-issue-t18976...
Jan 28, 2014 - Traction Control, Stabilitrak & ABS Issue. Tue Jan 28 ... The wife and I got in to head out and see my brother and as soon as I turned the key the ServiceTraction Control, Service Stabilitrak messages flashed and the ABS light came on. ... check your wheel bearings my was gone and caused the same thing ...

Chevrolet Impala Questions - Hello. I have a 2012 Chevy ...

www.cargurus.com > Questions > Chevrolet > Impala

CarGurusApr 6, 2013 - Occasionally when I hit the brakes I get a Stabilitrak Error Message " ... I believe GM still had 3 year/ 36,000 mile bumper to bumper ... After about 2 months of intermittent noises the ABS light came on, the service stabilitrak warning, servicetraction ... Edit....left hub bearing change after the right one changed.

Replaced front hub - now ABS/Stabilitrak lights on... - Chevy ...


0helpful
2answers

2002 Tahoe abs relay location

images for 2002 Tahoe abs relay location

Chevy ABS and Brake Dash Light fix - YouTube

? 24:15
https://www.youtube.com/watch?v=Jo76ylqgUR8
Dec 22, 2012 - Uploaded by Skizzot7
This is how to fix intermittent ABS and Brake dash lights on all Chevrolet ... That board is rather robust and is installed external to the vehicle in a location that sits .... I took the module out of a2002 Sierra and it is engineered with no T10 .... ABS Sensor and Harness 2000-06 Chevy Suburban Tahoe GMC ...

How I fixed a Chevy with an Abs and Brake light on - YouTube

images for 2002 tahoe wiring



1helpful
1answer

07 Chevy Silverado The motor caution light came on then came on the ABS light. seems like it's in third gear I hooked up the Solis I am getting three trouble codes one under the engine one under tran

Try checking the abs madule, that could be causing all the problems, such as the trans code and engine code. Also check the grounds cable maybe rusty or lose. I had a Chevy Tahoe and it was almost the same problems and it turn out to be the abs madule. Hope this helps good luck.
0helpful
1answer

2004 Chevy Tahoe ABS Brake LIGHT ON

First I suggest scanned the ABS module in order to know what fault code is stored there. Note it and send us for other details.

Good luck.
0helpful
1answer
0helpful
1answer

2004 chevy tahoe abs light came on and front wheel is rattling. Abs is engaging when I touch the brake pedel. What should I do?

look at that wheel as the metal ring thing that makes the ABS work has come loose on the end of the drive shaft,just tack weld it back into position
1helpful
1answer

Abs wheel sensors on 2004 chevy tahoe

yes they are four wheel abs that means there are four sensors one for each wheel
35helpful
4answers

2001 Chevy Tahoe with ABS & Brake light on.

I hope you have the problem fixed by now, but, it is the ABS control under the truck. You need to go under the hood and open the fuse box and disconnect the 60 amp fuse for the ABS, this will turn it off before it burns up. This however will also cause the traction assist off light to stay lit all the time. To the fix the problem you can pay tons of money ($700 or so) to have the dealership install a ABS control and the problem will happen again over time. Or, remove it yourself, go on ebay and ship it off to a guy who repairs them for about $150 and you will never have the problem again. Also, if you wrap your cable ends with plastic and protect them good, you can still drive you truck while the part is being worked on. It takes about a week.
Not finding what you are looking for?

2,832 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...