Any idea's ? Yes , learn how these system's work ! Looking at wiring diagram's to see what all is involved in the electrical circuit's for the brake & turn signal lamps . Plus learning how to test electrical circuit's with a DVOM - digital volt ohm meter .
Electric Testing Techniques You Need to Know
Testing is how to find this problem , not going by someone guessing who has not even looked at the vehicle ! Free wiring diagram's here http://www.bbbind.com/free_tsb.html Enter vehicle info. year , make , model an engine size . Under system click on lighting ,then under subsystem click on stop lamp or turn signals . Take your DVOM an at the rear right stop lamp bulb test for B+ voltage , check ground side . See which side of the circuit has the problem . Mastering Voltage Drop Testing with Pete Meier and Jerry Truglia
SOURCE: Driver side blinker won't blink
replace the drivers front bulb. There are 2 different elements in the bulb 1 for park lights 1 for directional
SOURCE: Changed multi function switch, bulbs, and
You have a bad connection at the rear passenger side turn signal. It is either the connection is corroded or a wire is loose on the ground side of the circuit.
Testimonial: "Thank you so much!!! Good things be with you!!"
229 views
Usually answered in minutes!
×