I have a 2004 Dodge ram truck. My horn doesn't work when I press on the steering wheel, but does work when unlocking and locking the doors. I had the dealer reprogram the computer to honk when backing up, and from then on, I can't get the horn to work. What's the problem

SOURCE: power door locks don't work on 2004 dodge ram quad cab

Maybe!!!! Wire taps are not a good thing. But yes I do them also... Kinda a catch 22! But the bad thing about wire taps are that they carode the exposed wires. Recheck the conections where you made the connection. If it breaks contact then the locks might not work. Or if the conection at that point is grounding out and blowing your relay or fuse. But if your tailgate lock still operated when all others did not then chances are that one of the door switches is bad. after you recheck your wires, disconnect the battery for about 10 to 15 minutes. If it is the relay then that should let it cool off and reset itself long enough to work or atleast hear a click out of the locks when you power up again. LISTEN CLOSELY FOR THE CLICK. Have someone inside of the car and up by the front of the car and this will increase the chance to hear it. You do not need the key on for the test because the locks have power all of the time. Good luck and let me know.

SOURCE: Truck possessed!

take to a dealership because it sounds like a problem in the security system and take both remotes so they can reprogram them to the truck

Harvey N Tawatao

• 3854 Answers
• Posted on May 13, 2009

SOURCE: When I lock the door on my 99 dodge durango with

Look in your manuel, there are steps to change the Key less remote setting to customize it the way you'ld like the car Key less system to work.
Good luck and hope this helps, if your still having problem. Just drive the Dodge dealer and ask the Service adviser to help you out, he or she would be more then happy to reprogram the key less system for you.

SOURCE: 2004 Dodge Ram 1500 Quad Cab Drivers side power door lock broken

Sounds like the link rod to the latch are jammed in the locked position by something inside the door or it came off. Any way, you have to remove the door panel to get access to it.

SOURCE: Keyless Entry won't Lock/Unlock back door

Factory keyless?