1994 Dodge Intrepid Logo

Related Topics:

Posted on Nov 11, 2008
Answered

Car won't stat

My car won't start in the first try.Some times takes me three tries just to started. I replaced the crank shaft sensor and the campshaft positioner sensor.I changed the fuel filter about two months from now.
I checked the gas regulator and gas is being pumped. But the car just won't star in the first try.

Answer This Question
  • eddiesbs Nov 19, 2008

    Every time I turn the switch on their's always a crank. So by process of elimination it's not the starter

    plus about two years ago I tooked to the dealer ship. They changed the neutral switch and the ignition key. What's my next option?

×

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.
Corporal:

An expert that has over 10 points.
Mayor:

An expert whose answer got voted for 2 times.
Problem Solver:

An expert who has answered 5 questions.

  • Contributor 16 Answers
  • Posted on Feb 01, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.
Corporal:

An expert that has over 10 points.
Mayor:

An expert whose answer got voted for 2 times.
Problem Solver:

An expert who has answered 5 questions.

Joined: Feb 01, 2009
Answers
16
Questions
0
Helped
3627
Points
22

Could also be a bad connection at the coil pack/module. This was my problem.

Anonymous

Level 1:

An expert who has achieved level 1.
Corporal:

An expert that has over 10 points.
Mayor:

An expert whose answer got voted for 2 times.
Problem Solver:

An expert who has answered 5 questions.

  • Contributor 12 Answers
  • Posted on Nov 19, 2008
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.
Corporal:

An expert that has over 10 points.
Mayor:

An expert whose answer got voted for 2 times.
Problem Solver:

An expert who has answered 5 questions.

Joined: Nov 19, 2008
Answers
12
Questions
0
Helped
3656
Points
13
Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Have a 2001 lexus is300 with a code p1125 won't start what's wrong
The code is for a failed throttle control motor or circuit.
You might check to see if the throttle control is plugged in, otherwise you may need a shop manual to test the component.
Read full answer
Dec 07, 2012 • Lexus IS 300 Cars & Trucks
1helpful
1answer

1988 Olds Delta 88 has problem starting on the first try. I have pulled codes and replaced Cam Shaft Sensor and the Module. Sometimes it takes 4 or 5 tries before it finally starts.
have you tryed air mass flow sensor check and see if there are any vaccumm leaks too also if that fuel pump is getting bad it will take three or four trys to get fuel to your injectors. try turning the keyy three times before starting the car see if it has better results
Read full answer
Nov 12, 2012 • Cars & Trucks
0helpful
2answers

!994 LaSabre starts ...runs awhile then turns off. Fuel pump replaced, ran for a week ...now stalling out again. WOn't start this last time around.
If it is a 3.8 engine change the crank sensor,they go bad on the 3.8 engines.
Read full answer
Jan 15, 2018 • 1994 Buick LeSabre
0helpful
1answer

2002 saturn sl won't start, turn over but won't start
Done cars have a kill switch if they are low on oil. Check your oil. If the oil is good, it may be the ignition switch.
Read full answer
Jan 01, 2018 • 2002 Saturn Sl
0helpful
1answer

2002 saturn sl won't start, turn over but won't start
If the engine fires up for a second or two with starting fluid then the fuel pump is weak.I would check the fuel pressure and if its not within the specs then replace the pump and filter.
Read full answer
Jan 26, 2012 • 2002 Saturn Sl
0helpful
1answer

Before the car would **** hard at any speed and it might do it again in 30 min. or aweek later. we replaced the cam shaft censor & crank shaft sensor. now it continuely surges mildly and the tacometer...
My car has and is doing the same thing. I replaced the cam and crank sensor less than 3 months ago, then car started dying, not starting, hard to start..etc...just like before I replaced sensors. NOW, it won't start and I am stranded~!!!
I know this is not a solved issue for you, just wanted you to know you weren't alone with issue and I hope we both can find resolve soon!!
Read full answer
Aug 22, 2011 • 2005 Nissan Altima
2helpful
2answers

Code p0340 on 2000 dodge intrepid
it might be the cam shaft sensor it might be the crank shaft sensor the best thing to do is replace them bolth. but it does sound like it may be either one because if one goes out the other will still work but when starting the car it will take longer for it to read from either or the one sensor that is still working because they work together to tell the system to deliver the gas. im pretty positive that it is either the cam or crank shaft sensor
Read full answer
Jun 21, 2010 • 2000 Dodge Intrepid
1helpful
1answer

Car would not start, after siiting for an hour it did start .
mcdevito75 here, BEST BET, let the shop do this work, too many un forseen problems could come up. The stalling and unable to start for a while could also be a bad ignition module, no test for this part, but I would have it changed, for if it is a bad ignition module, all this other work will not fix the stalling and later start of your car.
Read full answer
Feb 27, 2010 • 2002 Kia Sedona
0helpful
1answer

Car cranks but won't start. Diagnostic code says
I changed all the parts I mentioned and finally I decided to try the crank shaft sensor and if that didn't work I was going to replace the cam shaft sensor. Luckily the crank shaft sensor worked but only after I replaced all the other parts. But at least now it finally started.

Thsank you.
Read full answer
May 17, 2009 • 1997 Dodge Grand Caravan
8helpful
2answers

2005 Dodge Stratus ? Camshaft Position Sensor causing problems (I
I had the same problem with my '05 Stratus SXT 2.4 DOHC. I've replaced the cam pos sensor and it seems to be running fine right now. On the Dodge forums a lot of the guys say that you need to replace the crank pos sensor too. I've bought one of those just in case it comes back again. Hope this helps.
Read full answer
Apr 24, 2009 • 2005 Dodge Stratus
Not finding what you are looking for?

View Most Popular

1994 Intrepid

  • Cars & Trucks

Related Question

Have a 2001 lexus is300 with a code p1125 won't start what's wrong

  • Lexus IS 300 Cars & Trucks

Related Topics

145 views

Ask a Question

Usually answered in minutes!

Popular Questions

NECESITO, VER COMO VA LA CADENA DEL TIEMPO DE

2000 Dodge Intrepid

2002 Dodge Intrepid transmission not shifting

1997 Dodge Intrepid

Location of camshaft sensor on a 3.5 dodge intrepid

2002 Dodge Intrepid

Need diagram to replace timing

Dodge Intrepid Cars & Trucks

2002 Dodge Intrepid transmission not shifting

2002 Dodge Intrepid

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...